20 inches away yet 40 hours apart.

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
113,088
Location
The High Chapperal
I have two hour meters on my C4

One analog meter that came with the unit with 0 hours on it and one Tiny Tac that I put on it about 5 hours into ownership.

When the unit is running the Tiny Tac shows the RPMS, when it's off it shows the hours.

It also flashes every 50 hours as a reminder to brush my teeth.


For some weird reason the TT is reading 642 and the Analog is showing 602 ..

The TT runs on a battery and has it's sending/reading wire wrapped around a spark plug.


Les?
 

joey895

Supportive Member
Joined
Oct 7, 2006
Messages
2,436
Location
Florida
Name
Joey J.
I could be wrong but I believe the tiny tach is counting hours anytime the key is in the on position and the analog is only counting when the engine is running.

Sent from my Galaxy Nexus using Tapatalk 2
 

Shane T

Member
Joined
Nov 7, 2006
Messages
1,663
Location
Waukesha, WI
Name
Shane Tiegs
I could be wrong but I believe the tiny tach is counting hours anytime the key is in the on position and the analog is only counting when the engine is running.

Sent from my Galaxy Nexus using Tapatalk 2

I think its the other way around. Analog runs with key and TT is activated by impulse from plug wire. I have both on my PowerClean and have the same difference in readings as Mike.
 

Becker

Member
Joined
Oct 8, 2006
Messages
7,359
Location
Snohomish, WA
Name
Becker
I have the same issue.. TT and HOBBS do not agree.

I might use my phones stop watch on the next big big job and see who is a liar.
 

Jim Martin

Supportive Member
Joined
Oct 7, 2006
Messages
10,878
Location
Arizona
Name
Jim Martin
analogs drag.....if you watch it all the way to the right you can see it vibrate...and jump up and down...this slows down the hour rate and in time it will lose accurate hours..

if a analog is all you run then you will never know the difference....put it up against an accurate digital and you will see the true hours......
 

hogjowl

Idiot™
Joined
Oct 7, 2006
Messages
48,154
Location
Prattville, Alabama
Just change the engine oil as soon as it starts turning dark.

Change the pump oil and blower oil every time you have your prostate checked.

It doesn't have to be an exact science.
 

Jim Martin

Supportive Member
Joined
Oct 7, 2006
Messages
10,878
Location
Arizona
Name
Jim Martin
Just change the engine oil as soon as it starts turning dark.

Change the pump oil and blower oil every time you have your prostate checked.

It doesn't have to be an exact science.


so that explains why you run with the cleanest oils in the industry.....I personally don't look forward to those exams............
 

Latest posts

Back
Top Bottom