BradFenstermaker
Member
Mine is the smaller blue turbo hybrid.
I need the reinforced vac hose from spinner to handle.
Who has them??
I need the reinforced vac hose from spinner to handle.
Who has them??
Turbo bottom vac hose
- Thread starter BradFenstermaker
- Start date
Lee Stockwell
FOJL
I just use a flexible 1.5" hose, and replace it every year or so. Have a big chunk of it in the shop.
dgardner
Moderator
The hose you seek is called vac-u-flex wire reinforced hose.
Cobbs carries it (or at least used to) - I ordered some from them about 5 years ago. I remember this well because I ordered vac-u-flex cuffs too and they sent the wrong ones. They promised to send out the correct cuffs but never did - even after several emails.
This place claims to carry the Turbo Hybrid replacement hose if that's easier for you:
http://www.klpro.com/Turbo_Hybrid_Parts-24_Steel_Coil_Vacuum_Hose_TH-140.html
Cobbs carries it (or at least used to) - I ordered some from them about 5 years ago. I remember this well because I ordered vac-u-flex cuffs too and they sent the wrong ones. They promised to send out the correct cuffs but never did - even after several emails.
This place claims to carry the Turbo Hybrid replacement hose if that's easier for you:
http://www.klpro.com/Turbo_Hybrid_Parts-24_Steel_Coil_Vacuum_Hose_TH-140.html
BradFenstermaker
Member
Thanks Lee I have 1.5 laying around too. If I remember correctly the spinner side is barbed.
Dan I will look into the link. I found some non reinforced locally several yrs ago. It has spit between ribs like the original.
Of course I see it after I finished a floor. LOL
Dan I will look into the link. I found some non reinforced locally several yrs ago. It has spit between ribs like the original.
Of course I see it after I finished a floor. LOL
