A Question For The mechanics and TM Installers.......

[rwcarpet]

I am looking at another TM that has injection, and requires a return gas line to the tank. Can I just install a return line to the fill tube and let it return the fuel there? Would I need to drop a line into the tank? If I install in to enter the filler neck tube, can that create a static charge or explosive problem? I already have a single fuel tap for my older Ford Genny, and really didn't want to install a new dual tap system in my 03 Chevy Express.

 

[bob vawter]

Robert....ever try a Direct Drive unit?

 

[rwcarpet]

Robert....ever try a Direct Drive unit?

No Sir, I haven't, Old wise One!

 

[SMRBAP]

Where would you run the tube through?

I'd get the right tap - not too hard on most necks and not worth chasing vapor lock issues or fume buildup issues on a non airtight diy tap.

 

[Newman]

Where would you run the tube through?

I'd get the right tap - not too hard on most necks and not worth chasing vapor lock issues or fume buildup issues on a non airtight diy tap.

x 2

 

[packfancjh]

As an installer I would recommend getting the proper fuel neck kit.

 

[bob vawter]

No Sir, I haven't, Old wise One!

Look here Bob...yor either out there making big bucks or yor on the porch sucking hind tit.....
in my opinion the best BANG for the BUCK would be a BUTLER...a great machine wit great resale value.........
yor either a pro or a wannabe.................




















unless you can find a like new Steam Genie...
which will save you big bucks from the get................