Acrylic powder removal

miksar

Supportive Member
Joined
Dec 1, 2007
Messages
287
Location
Florence, Az
Name
Mike Fent
When cleaning a dark nylon carpet, a roughly 2 x 2 ft area turned orange. Evidently the owners kid had spilled a bunch of orange acrylic powder (owner is a nail tech) didn't see it till we rot ext it. Any ideas about removal would be appreciated. I was a thinking lightly spraying some acetone and extracting? Thx
 
Joined
May 12, 2007
Messages
2,519
Location
Bay City, MI
Name
Bruce
Make sure you vacuum first, and after you vacuum , vacuum some more , then when you get done doing that vacuum again and when you are tired of vacuuming do it all over again :lol:

Just saying make sure you get all of the dry powder out first
 
  • Like
Reactions: GCCLee

Royal Man

Member
Joined
Oct 8, 2006
Messages
4,989
Location
Lincoln NE
Name
Dave Yoakum
Since you got it wet and didn't remove it they you are likely screwed. Acetone will dissolve the carpet backing and make a bigger problem. It they would of told you ahead of time you could of followed Bruce' suggestion. Water activated it. That was the time to remove it. Now that it was activated and has dried it is likely permanent.
 

Vivers

Supportive Member
Joined
Feb 20, 2012
Messages
833
Location
Aliso Viejo
Name
Bill
That's a tough one but maybe a aggressive solvent applied only to the fibers and rotary tool out. But be sure to vacuum first just in case there's still is any dry in the bottom of the fibers
 
  • Like
Reactions: Royal Man

GCCLee

Supportive Member
Joined
Jan 29, 2012
Messages
5,113
Location
East TN
Name
C. Lee
Dupont Acrylic Paint Reducer.

Automotive paint shop

I bet it eats the fibers though!!
 

Royal Man

Member
Joined
Oct 8, 2006
Messages
4,989
Location
Lincoln NE
Name
Dave Yoakum
That's a tough one but maybe a aggressive solvent applied only to the fibers and rotary tool out. But be sure to vacuum first just in case there's still is any dry in the bottom of the fibers

The most i would do is to use citrus solvent on a cloth and not on the fiber. The problem is that the spot is so large and solvent may delaminate the carpet backing. Good luck with this one. But be carefull.Take it slow. The cure may kill the patient. Knowing when to quit can be a good thing. Carpet hero complex can get you into a lot of trouble $$$$$$.
 
Last edited:

Royal Man

Member
Joined
Oct 8, 2006
Messages
4,989
Location
Lincoln NE
Name
Dave Yoakum
On second thoughts. Your screwed! That spot ain't going anywhere. When activated by water it turns into plastic. Solvent won't touch it. Anything that would dissolve it would be serious damage to the carpet. Just make sure you don't own THEIR spot. A rung over the spot or a patch is the solution.
 

GCCLee

Supportive Member
Joined
Jan 29, 2012
Messages
5,113
Location
East TN
Name
C. Lee
Make sure you vacuum first, and after you vacuum , vacuum some more , then when you get done doing that vacuum again and when you are tired of vacuuming do it all over again :lol:

Just saying make sure you get all of the dry powder out first

First post nailed it!
 

Latest posts

Back
Top Bottom