Brass

[Farenheit251]

I've got a Parker shut off and a new feather touch valve where I've broken a brass nipple off in them. Tried an EZ out on the first but the brass was too soft. Any tips on how I can salvage them.

 

[Jim Martin]

I have broken mine a few times and the EZ out has always removed it...Are you sure that your EZ out is large enough......the only other thing you can do is slowly put a cut in the brass....a small copping saw blade will work...Brass is pretty soft and cuts easy....just don't over do it and cut into the threads of the valve

 

[Erik]

You may have to grind the end of the easy-out a bit for a tite fit. If it bottoms out.