Cimex

[ACE]

I am having trouble metering out the right amount of solution with the Cimex. I always have to go back and wipe down baseboards because it flings out excess solution. Is this normal? How do I clean out the solution lines from the 3 heads? I get much better results by spraying down the encap the scrubbing.

 

[dgargan]

Rick has a download on the www.excellent supply web site on how to clean the comes heads

 

[sweendogg]

Also watch his video on cimexing. If you get better results by spraying something is going wrong.. what product are you using. If its a good encap shampoo, you should get great results from the gravity feed. If its a low foam encap product, then you would get better results spraying down.

The product should foam up quick enough to prevent a lot of fling around.

 

[Lee Stockwell]

http://www.excellent-supply.com/

 

[ACE]

Thanks!

 

[MerCrewser]

Might be flinging excess solution because the red plugs have worked loose from the blue wheel. Happened to me.

 

[ACE]

Might be flinging excess solution because the red plugs have worked loose from the blue wheel. Happened to me.

Bingo! That was the issue. I ordered 2 new sets of caps from ES for about $5.00. I wish all my repairs were that cheep and easy. I seems like everything is breaking down here latley.

 

[Mikey P]

man, you must have been hosing down those base boards...too funny.