Cuff Question

[Soxpac]

Hey guys, I used two 25' sections of 1.5" vac hose w/ my porty AND I hate the barbed hose connector I bout for like $3. I don't always use all 50' so I would love to use Mytee's Cuff Lynx or something similar. Without sparking a brand war, how can I connect mine using my 1.5" hose. With that being said Id still need to be able to hook up to my machine which has the barbed standard porty connection. Any advice would be greatly appreciated.

 

[XTREME1]

Not worth the agravation. What are you going to do spin the cuff off and replace with a hose end when not running 50 ft? Maybe get some 2 inch hose at the machine and start from there

 

[Soxpac]

I've never used them. I know absolutely nothing on the matter. So how could I adapt a 2" hose at the machine?

 

[floorguy]

just keep one of the hoses with the vinyl fitting for the barbed.....

OR

swap out the barbed for a cuff fitting....

http://www.mytee.com/products/h135-starter-2-male-x-2-male-pipe-thread-carpet/#.UOS_O29Tx8E...

there is a few choices there...

start with 2" at machine and go down....

ummm i think joe has some to

http://www.realcleaners.com/cool_cuffs.html

everything for "starters" is 2"....so either way you need to get a reducer