Eat your heart out Damon
- Thread starter Mikey P
- Start date
hogjowl
Idiot™
Always
Mark Saiger
Mr Happy!
Is that a vinyl floor?
Laminate?
Using a hard surface wand?
Laminate?
Using a hard surface wand?
Mikey P
Administrator
Sheet vinyl
SS12 works great
SS12 works great
Old Coastie
Supportive Member
Yes, always use toilet paper instead of the hydroforce.
Fewer burns and less mess.
Fewer burns and less mess.
Mikey P
Administrator
While I'm picking on Damon..
Look at all that room...
Look at all that room...
Wandslinger
Member
Pioneer Floorcare
Member
steve_64
Member
- Joined
- Aug 11, 2012
- Messages
- 13,372
So padding over flushing?
Lee Stockwell
FOJL
We agree, padding has it's place.
steve_64
Member
- Joined
- Aug 11, 2012
- Messages
- 13,372
How many a day?
Mikey P
Administrator
If I left my phone at home I could do four. As it is two is enough.
steve_64
Member
- Joined
- Aug 11, 2012
- Messages
- 13,372
Looks like a good gig. Are you interviewing yet? At your rate you will be needing help soon.
Mark Saiger
Mr Happy!
Major truth to this!
hogjowl
Idiot™
WAT IS WRONG WITH YOU?
dealtimeman
Everyday is Saturday.
that response might take a while jimmy, don't wait around for it.
hogjowl
Idiot™
Gas
Old Coastie
Supportive Member
You could just tell him instead.
I just saw this, for some reason I don't get alerts a lot of the times. Now I have to go back and check this thread out. I am working in a very mountainous area today. A little town called Manton. If you don't hear from me it's because a bear ate me. And I don't mean the San Francisco type of bear.
Bearbacked?
Looks like I've been reduce to using my porty and orbot for a couple of days.
Well yesterday was hell for me. Today looks to be equally as fun. Yesterday while driving my van up to Manton my check engine light started flashing and I lost all power. I had no cell reception and was out in the middle of nowhere. I limped my van into the job site, completed my work and then limped it home. The last time this happened to me, the distributor went bad.
My code reader is saying "random engine misfire". I replaced the cap and rotor and that didn't fix the problem. I don't have the patience to replace the plugs, screw that! Anyway, putting the van in the shop.
This is going going to be hell. What a joke. I show up in a new Promaster and whip out my EDIC porty. I would just take a couple of days off, but I'm booked solid. This is going to be fun.
Well yesterday was hell for me. Today looks to be equally as fun. Yesterday while driving my van up to Manton my check engine light started flashing and I lost all power. I had no cell reception and was out in the middle of nowhere. I limped my van into the job site, completed my work and then limped it home. The last time this happened to me, the distributor went bad.
My code reader is saying "random engine misfire". I replaced the cap and rotor and that didn't fix the problem. I don't have the patience to replace the plugs, screw that! Anyway, putting the van in the shop.
This is going going to be hell. What a joke. I show up in a new Promaster and whip out my EDIC porty. I would just take a couple of days off, but I'm booked solid. This is going to be fun.
Attachments
Last edited:
hogjowl
Idiot™
Why in the world don't you just take it and have it repaired?
If you have time to do all this yourself then you're either starving or taking evenings away from family!
If you have time to do all this yourself then you're either starving or taking evenings away from family!
Can't knock a guy for trying. Well, you could
. The bastard is going in the shop today.
CAN'T YOU READ YOU IDIOT HE SAID HE WAS GOING TO PUT THE VAN IN THE SHOP!
Nate The Great
Member
Look at all that space... What numb nuts buys such a big van for portable work.....
