If any are interested

Wade Moore

Member
Joined
Mar 29, 2019
Messages
51
Name
Wade Moore
This is a break room I did yesterday that I do 3 times a year. The equipment I use is a kiavac 1750, 17” floor machine with conditioning pads, and a flat mop. I spray the floor with water and top scrub the poor layers of finish down to a good layer. To apply the finish I use a microfiber flat mop. I pour finish straight from the bottle and spread. No mop and bucket. With high and low spots it will look splotchy but will not be noticeable after the finish is applied. Sometimes it might take 2 maybe 3 coats of finish. It depends on how much you have to remove. When I’m done applying finish I keep the flat mop in a trash bag to keep it fresh. This break room is 1340 sq ft @ .60 sq ft. So one coat is all I do. It takes me about 5 hrs. with moving tables and all. When scrubbing the floor it is more like a wet sanding than making a slurry when using stripper solution. You don’t want it to dry but if it does it dries to a powdery film which can be wiped off. You cannot do that when using a stripper solution you would have to re-apply.

ED4DBF37-B288-4E62-BFCC-FF1D41B75BF8.jpeg 08893A41-ABBF-4155-8602-23EBC80B3DA6.jpeg EFBC47DB-B8C7-4A2E-A2CE-AC3C8F54A956.jpeg A0279D6C-48AB-4EB7-A846-8CF89B72F00D.jpeg 107D96C3-9C4E-4849-B448-8A25D1953C55.jpeg 1E397707-BDE2-4CD3-AC6B-18FBABDBF3CF.jpeg ED9331F3-3353-4D78-A83F-9C469761D3FE.jpeg 0E9C2877-319F-403A-B076-6A9180E914B4.jpeg 6E0C3504-2E35-49C7-ADAD-E09F593D973D.jpeg
 

Attachments

  • EE44D40D-1931-4F61-8103-44A1C84F9AAA.MOV
    27 MB
  • 604AEF5A-A958-4128-AC30-070A8121A274.MOV
    31.7 MB
  • 53437768-C906-4DCE-8A53-25E63EF921DA.MOV
    20.3 MB
  • 41B28501-8694-4C32-B305-27C76458935C.MOV
    29.4 MB

Old Coastie

Supportive Member
Joined
Jun 29, 2015
Messages
7,504
Name
Stephen
Yup. Unless they want a full-on strip and refinish. I use a similar process for my customers.
 
  • Like
Reactions: Wade Moore

Wade Moore

Member
Joined
Mar 29, 2019
Messages
51
Name
Wade Moore
You’re using an spp?
Yes that’s what I use. I get them from Jon Don. They have the 3M surface prep pads in the 14”x20” square scrub pads. The pads I use are called conditioning pads (same type of pad) but less expensive. I use the 17” with a 175.
 
F

FB7777

Guest
AAAAH

JANITOR PORN



I'd rather lose $1000 than have to go out an earn it working with wax and stripper
 
  • Like
Reactions: Cleanworks

Cleanworks

Moderator
Joined
Oct 22, 2012
Messages
28,038
Name
Ron Marriott
If you have to explain a joke, its no longer funny. Must be some short guys on this board cause these fine jokes just go right over your head.
 
F

FB7777

Guest
perhaps an explanation dilutes the impact of the “humor”

Kindly explain anyways
 

Hack Attack

Member
Joined
Dec 19, 2017
Messages
5,620
Name
Dan
Needs a scrub and topcoat about 14? months since stripped right back and resealed

right aisle has been scrubbed and burnished, left aisle not burnished yet

20190515_124214.jpg
 
  • Like
Reactions: Kenny Hayes

Hack Attack

Member
Joined
Dec 19, 2017
Messages
5,620
Name
Dan
I dont mind my once a week ones like above, the 363 days of a year contracts suck
 

Kenny Hayes

Member
Joined
Apr 17, 2009
Messages
9,607
Name
Kenny Hayes
Of course it’s either nights or weekends. Then, there’s counter moves🤷🏻‍♂️ Aw lawd!
 
Back
Top Bottom