It's unique alright..

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,877
I dont think the vac relief valve was on it then.

Keith would know.
 
Joined
Sep 7, 2008
Messages
3,797
My problem was it was hard to push. The vac relief may make a world of difference.

I don't think it was there when I tried it.

Are there still little holes to clog up?

Why don't they make a teflon or a stainless glide?
 

Ryan

Member
Joined
Jun 29, 2009
Messages
2,415
If they would just stick some regular jets on it, it looks quite comfy.
 

Desk Jockey

Member
Joined
Oct 9, 2006
Messages
64,833
Name
Rico Suave
I like the looks of the handle and the better angle for the operator, the head looks light, but I've never tried one, hopefully in Nashville. 8)
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Name
Brian Robison
They're on the right track as long as it works in the cleaning department.

I always had my "assist handle" up higher so I didn't have too bend to much.

I like the back and forth cleaning like the zipper.

The window is cool but the vac relief could be done differently.

If you have to have a vac relief valve, there is a flaw in the design of the cleaning head. IMO.
 

sweendogg

Member
Joined
Jan 15, 2008
Messages
3,534
Name
David Sweeney
I got a hold of one to "feel Up" at Jon Don two weeks ago.. they are alot smaller in person.. or atleast I thought it did for a short guy!
 

harryhides

Member
Joined
Oct 7, 2006
Messages
4,429
Name
Tony
Say what you want about this wand but when we were doing the cleaning tests in Phoenix we used one TM twice.
Once with a conventional wand and once with this wand.
There was a very dramatic difference ie a third more soil removed and half the moisture left behind compared to the conventional wand.

Well done Keith !!
 

Desk Jockey

Member
Joined
Oct 9, 2006
Messages
64,833
Name
Rico Suave
:shock:

Tony was that at normal cleaning speed or slooooowww like Mandingo cleans? :p

Cool! I'll have to try her out.

Keith is one sharp cookie!
 

harryhides

Member
Joined
Oct 7, 2006
Messages
4,429
Name
Tony
Wyatt Earp said:
:shock:

Tony was that at normal cleaning speed or slooooowww like Mandingo cleans? :p
Cool! I'll have to try her out.

Keith is one sharp cookie!

At least his name isn't Edison........

Wyatt, each 3 ft square of carpet was cleaned by the same operator for exactly 60 seconds.
Probably a way faster pace than any chunky monkey could keep up with.
 

sweendogg

Member
Joined
Jan 15, 2008
Messages
3,534
Name
David Sweeney
Tony. What traditional wand did you use.. any greenhorns used for testing purposes? or glides for that matter?
 

Dolly Llama

Number 5
Joined
Oct 7, 2006
Messages
31,225
Name
Larry Capitoni
maybe the "boutique" cleaners can use a wand like that..

but that think is rOtomOldEd JOKE at $900+ bucks


i will say the Stud's da man though.
anyone that can get barn fans with magic lOuvers flying off the shelves at $700 a pop is my hero


..L.T.A.
 

Studebaker

Member
Joined
Oct 9, 2006
Messages
835
Name
Studebaker
The vacuum relief is only needed on a small % of carpet in my experience.

Cleaning has been better as well.

It's just different, get over it and take it for a drive.
 

Walt

Member
Joined
Aug 1, 2007
Messages
1,016
Studebaker said:
The vacuum relief is only needed on a small % of carpet in my experience.

Cleaning has been better as well.

It's just different, get over it and take it for a drive.


I bought this wand and ended up returning it. There was a lot to like - cleaning in both directions and the valve. However, it was difficult to impossible to move on many carpets. Further because I had to push so hard to get it to move the glide part began to warp a little. Also the little holes clogged significantly after a few days. This was not fixable by me or my supplier. Has ALL this been fixed? If so, I think it would be a real winner.
 

juniorc82

Supportive Member
Joined
Nov 7, 2008
Messages
1,671
Name
Jon Coret
I bet this wand will be a gadget that is laughed about and will be another gizmo that went no where
 

Dolly Llama

Number 5
Joined
Oct 7, 2006
Messages
31,225
Name
Larry Capitoni
juniorc82 said:
I bet this wand will be a gadget that is laughed about

"will" be??


While I can see an upl tool being rotomolded , a wand should never be...they get far to much abuse in the "real" world.

They missed the boat on the wand, it "might" be a great design in theory, but when they went CHEAP on manufacture materials in the interest of hi profit margins...they blew it.

"trendy" cleaners, rookies and know nothings will be their market niche .
It will never be a serious contender until the head is made of durable components



..L.T.A.
 

ruff

Member
Joined
Apr 19, 2007
Messages
11,010
Name
Ofer Kolton
Do not let Larry's vast inexperience in carpet cleaning + his brutal honesty mislead you guys.
Usually, case in study, he is absolutely right!
 

Johnny

Supportive Member
Joined
Oct 22, 2006
Messages
2,375
Name
Johnny
The ergonomics might benefit my hands, but that plastic head wouldn't last me thirty days.

Saphire should study shaving razor marketing and offer disposable heads. A six-pack for $300. They could dominate the market.
 

Dolly Llama

Number 5
Joined
Oct 7, 2006
Messages
31,225
Name
Larry Capitoni
kolfer1 said:
brutal honesty


LOL!!...I've heard that before , Ofer

but have learned some restraint in some situations.
and don't tell God, but sometimes I'll even tell a fib...

"honey, do like my new hair cut?"...... :shock:


..L.T.A.
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,877
the wand does come with a 10 year warranty in case your on the fence.
 

Latest posts

Back
Top Bottom