Jet Configuration on a Ti Wand

[BLewis]

Detail cleaning my 2 ti wands today, and when replacing the jets and extenders relized that I hadn't set aside the 2 inside jets. So I went through them and all 6 were 11002's on both wands. I know when I had my set up before that the 2 inside jets were a different size. For the life of me I can't remember what they were but they had a little wider spray pattern to cover that extra distance that the tube causes. Some help from you experts or suppliers please. Greenie you helped me with my pimp my 2 Ti's back in 06 what did you sell me for the 2 inside jets?

Thanks

 

[Jim Martin]

8002...9502...11002...11002...9502...8002,,,

best set up I have found....no streaking at all......very nice even pattern..

take the guts out of the extensions and use the little jet check valves

 

[Art Kelley]

With wand on floor jets facing you you start with 11004,9502.8003,floodjet,80015,9503. Nothing to it.

Or you could keep it 11002 all the way across like you have and it will be a nice even spray pattern.

 

[daniel@procarpet]

8002...9502...11002...11002...9502...8002,,,

best set up I have found....no streaking at all......very nice even pattern..

take the guts out of the extensions and use the little jet check valves

Jim why do you recommend taking the inside of the extenders out?

 

[BLewis]

Hey Jim, The guts of my extenders are out. One wand is set up with the little screen filters on the jets, that is why I went in to clean them out today. Only one screen had quite a bit of junk on it all the others were pretty clean. Now that I see the numbers you recommended I believe that I had 4 9502's and the middle two were 11002's before. Thanks.

 

[Jim Martin]

8002...9502...11002...11002...9502...8002,,,

best set up I have found....no streaking at all......very nice even pattern..

take the guts out of the extensions and use the little jet check valves

Jim why do you recommend taking the inside of the extenders out?

because I use the jet check valves not the ones in the extenders...

Hey Jim, The guts of my extenders are out. One wand is set up with the little screen filters on the jets, that is why I went in to clean them out today. Only one screen had quite a bit of junk on it all the others were pretty clean. Now that I see the numbers you recommended I believe that I had 4 9502's and the middle two were 11002's before. Thanks.

take the screens out and use the ones with out.....they are much better...no need for a screen on the jets..just make sure the wand valve has a good screen on it....