Thanks for stealing my thread.

Joined
Sep 7, 2008
Messages
3,797
Harper why don't you chime in on my rug shop thread in the marketing room.

I always value your input.
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
Re: Harper. I need your wise advice.

danielc said:
Harper why don't you chime in on my rug shop thread in the marketing room.

I always value your input.


You have been givin very good ADVICE.....From EXPERT's in the feild....Follow their advise..!

I will offer this little tIdBiT.....GO GET LAID.....!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You are looooooosing your mind ...with all this BB "bUllShItE"...... :idea:

STOP....chasing your TAIL...with all these BraInStOrMinG IdeAs.... :roll:

Make a plan & "STICK TO IT"..... :!:


"If you DON'T....You will end -up like Miss Robison... :oops: "
A LEGEND IN YOUR OWN MIND.......... :cry:

You guys are starting to give me a hEaDaChE.... :p
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
Re: Harper. I need your wise advice.

Harper loves me so much...I bet he calls my name out while he sleeps.


Which name? Is the question. Ivebeensold somewhat amus
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
Re: Harper. I need your wise advice.

I do worry about you...!

You are RACING toward a BB...."mElT-doWn"... :cry:

This place is a HUGH addiction for you..."It just AMAZES ME that you really think you are competent to offer advice to the members here...!" You have effectively accomplished NOTHING...!!!!!!!!

You have achieved absolutely no form of a success in your business... :roll:
Yet you BounCe oFF the wall's...ALL DAY...sHillinG DANGEROUS ADVICE.... :oops:

GROUPON is a SCAM....and in NO WAY....was designed for this INDUSTRY.... :!:

Those of us that "HAVE A CLUE"....sit back and laugh @ YOU....!!!!

If you knew of the PM'S....that circulate behind the scenes..."You would CrinGe..."

Sorry...
But the TRUTH HURT'S.. thathurts


ps So......"Don't go away :x "............."Just go away........................................
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
Re: Harper. I need your wise advice.

Awwe...you're just saying that. !gotcha!

Have you seen my bank account? Until then maybe you should try to base the rest of your comments on fact instead of your deranged opinion.

Dumbass....Yes you. !gotcha!
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
Re: Harper. I need your wise advice.

I've never foed anyone. You would have to be seriously anal retentive or just easily arroused if you actually have to foe someone.

I can't be all that bad....Can I?


I feel a poll coming on...but it could be a little biased. lol
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
Re: Harper. I need your wise advice.

Brian R said:
I've never foed anyone. You would have to be seriously anal retentive or just easily arroused if you actually have to foe someone.

I can't be all that bad....Can I?


I feel a poll coming on...but it could be a little biased. lol

Let the mElt-dOwN.....begin...."This will be uGlY..."... :cry:
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
Re: Harper. I need your wise advice.

Can we have a "page rank" for the people voting? lol

Ken Snow and Steve T being a 10
Harpet and Teri being a -1

I think that's fair. lmao
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
Re: Harper. I need your wise advice.

Brian R said:
Can we have a "page rank" for the people voting? lol

Ken Snow and Steve T being a 10
Harpet and Teri being a -1

I think that's fair. lmao
I am FINE with that...................... 8)

The only HOPE you have....Is that Ken & Steve....Would RecUsE themselves from the vote..
Because the have ENOUGH class ...Not to HurT you feelings.... thathurts



I DON'T.....I am used to dEaLinG with "WhiTeTraSh"...&..."PhoNeY'S.... !gotcha!

While YOU think ...that i am AbUsIvE & rude in my posting...I AM NOT... :!:
What ...I...do is Speak MY mind when ...I THINK..."The little guy is being SCREWED..&..
Mis LeD...!" THERE ARE SOME THINGS....That are JUST WRONG...IMO..you have reached
that "cRiTicAl mAss"... :shock:

You have grown from this.....
marykay.jpg


To this.........
NA-BF032_MADOFF_DV_20100317203647.jpg



May...I leave you with this.....????

s]http://www.youtube.com/watch?v=5j2F4VcBmeos]
 

Jack May

That Kiwi
Joined
Oct 7, 2006
Messages
2,423
Location
Palmerston North, New Zealand
Name
John
danielc said:
Harper why don't you chime in on my rug shop thread in the marketing room.

I always value your input.

Thants why Daniel, coz neither can help themselves when the other posts. Do you really want this mess in your constructive thread?

John
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
Harper...your problem is you don't read posts...you are too busy thinking of a response to care about it.
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
John Middleton said:
danielc said:
Harper why don't you chime in on my rug shop thread in the marketing room.

I always value your input.

Thants why Daniel, coz neither can help themselves when the other posts. Do you really want this mess in your constructive thread?

John


John is correct on all counts...

Dan
I did respond to your thread...!
The original thread ...Asked me to respond to an EXISTING thread you had going...
I could have JUST posted in that thread..It seems to me IF you really wanted my
PERSONAL opinion..???

You could have just PMed me....or phoned ..."You have my #"... :idea:

"THE truth be known.."
Mike had posted that it was a good thread...!
Soooo..after the poster's had given you Pros & Con's...of your idea...!

That wasn't enough for your EGO...."And thought you could get more traffic on the thread
If you used MY name to draw more traffic...in your NEED FOR aDoRaTioN... :oops:

Fess-Up...We have spoken on the phone many times..."right"
So..You didn't want my opinion...You wanted to get more attention.."LOOK @ME".."look @me"

You are a good KID... 8)
But you have made some WeiRd post on this board ...SEEKING RECONITION..some have "bAckFired..terribly...!
Just be yourself and TELL the TRUTH....you don't have to try so hard to IMPRESS.... :idea:
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
Harpocrite Wrote
But you have made some WeiRd post on this board ...SEEKING RECONITION..some have "bAckFired..terribly...!
Just be yourself and TELL the TRUTH....you don't have to try so hard to IMPRES


Mr. Pot, I would like you to meet Mr. Kettle.

Are you kidding me with this?
 
Joined
Sep 7, 2008
Messages
3,797
Harper we spoke on the phone once. You know your shit.

I don't give a flying fook what anyone here thinks. That is the truth.

If I can help someone, great.

If I can receive good practical help and learn, even better.

I will admit I am at a crossroads.

I can continue on my current path, or be bold and try something different.

Business is a risk.

There are no certainties.

I honestly feel if I do everyting I can to succeed, treat people fair, and do what is right, then I will succeed no matter what..

Didn't you post a while back that the best advertising you have was your trucks sitting on front of your shop? I was just trying to get your feedback.

Like I said I can open shop and not even clean rugs. Whatever rugs I do clean, I will actually have a real place to clean them.
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
danielc said:
Harper we spoke on the phone once. You know your shit.

I don't give a flying fook what anyone here thinks. That is the truth.

If I can help someone, great.

If I can receive good practical help and learn, even better.

I will admit I am at a crossroads.

I can continue on my current path, or be bold and try something different.

Business is a risk.

There are no certainties.

I honestly feel if I do everyting I can to succeed, treat people fair, and do what is right, then I will succeed no matter what..

Didn't you post a while back that the best advertising you have was your trucks sitting on front of your shop? I was just trying to get your feedback.

Like I said I can open shop and not even clean rugs. Whatever rugs I do clean, I will actually have a real place to clean them.

I responded in your original thread....Go checkitout... :mrgreen:

Until you get that box truck...you will STAY in that cross roads...!!!
PULL THE TRIGGER....!

01-04-09_1608.jpg
 

XTREME1

RIP
Joined
Nov 13, 2006
Messages
9,681
Location
Ma
Name
Greg Crowley
I dumped the box truck and went with extended vans. The box truck may work for you but people didn't realize I did mostly residential. Nice logo van much better
 

joe harper

Member
Joined
Oct 21, 2008
Messages
4,992
Location
florida
Name
joe harper
I agree on the 14' to 16'....Box trucks... !gotcha!

This box is 12'....and a "low profile"...great for resi. work... :!:

image_12.jpg



This is a 10' Box in the photo.......We custom built to 12'..... :idea:
image_11.jpg



DSC00031.jpg
 

XTREME1

RIP
Joined
Nov 13, 2006
Messages
9,681
Location
Ma
Name
Greg Crowley
First off I believe some a tolerate others. Boy ?genius thinks he has it all when in reality he is a live at home country bumpkin wishing he could have sex with something with most of its teeth
 

bob vawter

Grassy Knoller
Joined
Sep 15, 2007
Messages
43,979
Location
La La Land
Name
bob vawter
Brian is Harpers.......... Pavlov's dog!
ARRRFFF...BARK......ARRRFFFF..........BARK......ARRRFFF

I enjoy the witty exchange......
well HALF ....anyway!
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Location
Little Elm, TX
Name
Brian Robison
One of my subs had a really nice TM set up in the back of his Chevy truck with a shell on it.

Worked out great.

I think he even carried a floor buffer in it.
 

Doug Cox

Supportive Member
Joined
Dec 17, 2006
Messages
4,812
Location
Delavan, WI
Name
Doug Cox
Bundy said:
First off I believe some a tolerate others. Boy ?genius thinks he has it all when in reality he is a live at home country bumpkin wishing he could have sex with something with most of its teeth


OMG!! :shock:

Brian R said:
One of my subs had a really nice TM set up in the back of his Chevy truck with a shell on it.

Worked out great.

I think he even carried a floor buffer in it.

Do tell, what "Monster" TM your sub hauled around in a pickup.

bob vawter said:
Brian is Harpers.......... Pavlov's dog!
ARRRFFF...BARK......ARRRFFFF..........BARK......ARRRFFF

I enjoy the witty exchange......
well HALF ....anyway!

I love this guy!! LOL
 
Back
Top Bottom