What's the going rate for Pro-Capping commercial gluedown?
- Thread starter hanks75
- Start date
sweendogg
Member
Re: What's the going rate for Pro-Capping commercial gluedow
How about some more info? sqft.. wide open areas? lots of furniture? level of soiling/spills? type of machinery?
How about some more info? sqft.. wide open areas? lots of furniture? level of soiling/spills? type of machinery?
sweendogg
Member
Re: What's the going rate for Pro-Capping commercial gluedow
I'd say you will average maybe 900 to 1000sqft an hour if your lucky. Most of us who have performed encap would more readily use a floor machine, but you use what you have.
A good rule of thumb for commercial maintenance is start at 0.10/sqft and add for difficulty such as slower production rates, higher soiling ext. I would probably price it around .15/sqft for what you described.
I'd say you will average maybe 900 to 1000sqft an hour if your lucky. Most of us who have performed encap would more readily use a floor machine, but you use what you have.
A good rule of thumb for commercial maintenance is start at 0.10/sqft and add for difficulty such as slower production rates, higher soiling ext. I would probably price it around .15/sqft for what you described.
renegade_cowboy
Member
Re: What's the going rate for Pro-Capping commercial gluedow
I just did approx 25,000 sq ft at .17 a sq ft. I used the Procap machine for approx 11,000 sq ft, the rest was with my TM.
I just did approx 25,000 sq ft at .17 a sq ft. I used the Procap machine for approx 11,000 sq ft, the rest was with my TM.
Desk Jockey
Member
Re: What's the going rate for Pro-Capping commercial gluedow
We would probably price a small area like that just as Sweendog did, .15sq/ft.
We usually don't get down in that .10 range unless there is significant sq/ft 20,000 or more.
As the "dawg" said slower production in those cubes, down to 1,000sq/ft if you're using a Cimex, half of what you could do in open areas.
We would probably price a small area like that just as Sweendog did, .15sq/ft.
We usually don't get down in that .10 range unless there is significant sq/ft 20,000 or more.
As the "dawg" said slower production in those cubes, down to 1,000sq/ft if you're using a Cimex, half of what you could do in open areas.
Re: What's the going rate for Pro-Capping commercial gluedow
Back from the quote. It ended up being 3600 sq ft and I bidded .16/ sq ft and got the job. Come to find out, the first bidder was $300 more than me. At first I felt like an idiot, but I later found out that .16 wasn't bad.
Back from the quote. It ended up being 3600 sq ft and I bidded .16/ sq ft and got the job. Come to find out, the first bidder was $300 more than me. At first I felt like an idiot, but I later found out that .16 wasn't bad.
Dolly Llama
Number 5
Re: What's the going rate for Pro-Capping commercial gluedow
attaboy, Bill
Good job!!
..L.T.A.
hanks75 said:
attaboy, Bill
Good job!!
..L.T.A.
Desk Jockey
Member
Re: What's the going rate for Pro-Capping commercial gluedow
Awesome!
That's great, try not to get too caught up in sq/ft and look at what you want to make an hour. Then divide that amount by the sq/ft to get your rate.
Awesome!
That's great, try not to get too caught up in sq/ft and look at what you want to make an hour. Then divide that amount by the sq/ft to get your rate.
sweendogg
Member
Re: What's the going rate for Pro-Capping commercial gluedow
Yuppers.. I learn from the best. :mrgreen:
Yuppers.. I learn from the best. :mrgreen:
