New Shelving Kits

[tcdepot]

For the past few months, Chris Pond and myself have been working on designing shelving kits for units. The picture below is our first custom shelf for a customer. The unit is a HydraMaster CDS with a Water Pond.

We are currently mapping out a two-tier chemical shelf that will tie into the left side of the van.

Just thought I'd show you guys and see what you think.

 

[hogjowl]

Can I get an upholstered cushion and pillow with it?

 

[Desk Jockey]

Looks nice.

It needs a bottom shelf on both of them and that space can be utilized and not wasted. I know its adds to the cost but it also adds to the value.

 

[Jim Pemberton]

Nicely done.

 

[tcdepot]

Looks nice.
It needs a bottom shelf on both of them and that space can be utilized and not wasted. I know its adds to the cost but it also adds to the value.

We've been thinking about running a bottom shelf on it, but this particular customer was okay with putting spotting machines and fans on the floor.

 

[Desk Jockey]

Depending on the type of airmovers they will just roll around back there. They need you to make them an airmover shelf or drill some holes to use a Rope Ratchet. They work good and are a simple solution to corralling your equipment.

http://www.lowes.com/pd_54992-72607-10020_0__?productId=3658424

 

[dgardner]

Looks nice - stainless?

 

[tcdepot]

Looks nice - stainless?

Yes, they are stainless and then powder coated aluminum gray after that.

 

[Desk Jockey]

They look sharp.

I bet you sell a bunch of them.

 

[GeneMiller]

Yes, they are stainless and then powder coated aluminum gray after that.

Very nice. Why bother with powder coating. Colors always look nice but my experience with powder coating is that the chemicals peel it off. Sooner or later one will spill.

Gene

 

[mirf]

good looking shelf. I would stay away from the bottom shelf so I could hose it out.

 

[handdi]

need to make the hose reel electric or lower it so ya don't have to climb in the van
but good ideas but a little late for me

 

[handdi]

also get red hose the black comes off on your hands

 

[Able 1]

"Looks" GREAT! !! I personally would hate that setup.. getting that far into the van to grab a gallon of juice is something I hate! You should be able to grab what you need without getting in the van(unless it's a specialty tool)..

 

[handdi]

i would still want the side shelves for the bottles
but the front ones would be great to have for storage for things ya don't use every day
great idea

 

[Scott S.]

someone needs to make a bed drawer that comes out the back of the van about 4 ft that you can put extra goodies in but can handle the weight of a man (even us big guys) to stand or kneel on when we have to get into the back of the van.

 

[handdi]

they have them scott 2700.00 for a nice one

 

[Nate The Great]

i would still want the side shelves for the bottles
but the front ones would be great to have for storage for things ya don't use every day
great idea

The SS spinner rack they had was a good idea.... It was said to be tight to get jugs in/out.... I put a order in with @John Olson but SS told him they discontinued it.... I still think that's the best for a chemical rack....

The ones posted above are nice for storing/organizing other things...

 

[Desk Jockey]

The SS spinner rack they had was a good idea.... It was said to be tight to get jugs in/out.... I put a order in with @John Olson but SS told him they discontinued it.... I still think that's the best for a chemical rack....

Saw it in the demo van at Mikeyfest.

Too bad it was pretty cool idea.

 

[kingjoelking]

someone needs to make a bed drawer that comes out the back of the van about 4 ft that you can put extra goodies in but can handle the weight of a man (even us big guys) to stand or kneel on when we have to get into the back of the van.

http://www.slide-master.com/products/166-bedslide

 

[kingjoelking]

The SS spinner rack they had was a good idea.... It was said to be tight to get jugs in/out.... I put a order in with @John Olson but SS told him they discontinued it.... I still think that's the best for a chemical rack....

The ones posted above are nice for storing/organizing other things...

I have one Im getting ready to get rid of.

 

[Nate The Great]

I have one Im getting ready to get rid of.

Lmk

 

[Scott S.]

Not quite what i ment, i ment. A drawer that pulls out, not slide everything out. Haha

 

[Nate The Great]

Not quite what i ment, i ment. A drawer that pulls out, not slide everything out. Haha

Hey @Zee you still got the pictures of Jimmy's pullout drawers?

 

[Mikey P]

Next up should be some shelves that sit up high for the new tall boy Euro Vans.

Utilize all that space above the vacuum reels that mount in the rear

 

[Zee]

Hey @Zee you still got the pictures of Jimmy's pullout drawers?

I don't think I do but the old San Diego mikeyfest pictures used to be on here, somewhere... And there are pictures of his setup.