Film-formers vs. crystallizing polymers

rick imby

Member
Joined
Jun 5, 2009
Messages
2,206
Location
Montana
Name
Rick
A CRB or Certified Pile lifter are not vacuum cleaners (two brushes pulling up)---and no vacuum cleaner has near the suck of even a small TM.

Sold many Certified Pile Lifters lately?

I'm just here to agitate----grin
 
  • Like
Reactions: Jimmy L

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,162
Location
Ne
Name
Jimmy L
Never in my life have I seen such over hyped products. Making up stupid names for the polymers . When in reality they probably are just a form of floor wax. But I guess you have to over hype to get $45 a gallon.

Most over hyped products in our industry.
 

Larry Cobb

Member
Joined
Oct 7, 2006
Messages
5,795
Location
Dallas, Texas USA
Name
Larry Cobb
A CRB or Certified Pile lifter are not vacuum cleaners (two brushes pulling up)---and no vacuum cleaner has near the suck of even a small TM.
Sold many Certified Pile Lifters lately?

I'm just here to agitate----grin

They are required by some manufacturers for commercial carpet warranties.

For good reasons.
 

Scott S.

Supportive Member
Joined
Feb 3, 2008
Messages
3,224
Location
PA
Name
Scott
Ok. So i left some en apuclean rtu in a jug. Here is what i got when it dried.

 
  • Like
Reactions: J Scott W

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,162
Location
Ne
Name
Jimmy L
So can you admit that all it leaves is a dry residue? Encapsulation is a fancy marketing term to sell more product.
Stay away from any yellow or white residue. You want a clear crystal ( Powder)

Did you know that chemspec's formula 90 also leaves a DRY RESIDUE that can be vacuumed up?
Read the product description. Why you can use that as a bonnet cleaning solution at 1 oz per 5 gallons of water and be assured it will leave a DRY residue that can be vacuumed up : )
 
Last edited:

Goomer

Member
Joined
Feb 9, 2009
Messages
3,398
Location
Bronx, New York
Name
Frank Mendo
There would be less debate about this method if a proper vacuum process was actually necessary to achieve the same level of appearance improvement that the method is able to achieve without it.

To the benefit of the manufacturers of course.
 

kevinj6121

Member
Joined
Jun 7, 2014
Messages
319
Location
Calabash, NC
Name
kevin
Sometimes i think we all over think, over complicate, and over analyze things on lots of topics, not just this one
if product A works good and product B does not then i buy product A end of story,
i'm no chemist and don't concern myself with how a product does what it does,
if it works good and doesn't kill me or my customers i'll use it.
I am not an automobile mechanic nor do i totally understand how they work, I just know i get in, turn the key, the thing starts, i put into gear and drive. Don't care how it does it but only that it does. That was just an example, maybe not a good one but i think maybe i made a point.
 
  • Like
Reactions: Condog

encapman

Member
Joined
Oct 7, 2006
Messages
2,258
Location
St Petersburg, FL
Name
Rick Gelinas
Sometimes i think we all over think, over complicate, and over analyze things on lots of topics, not just this one
if product A works good and product B does not then i buy product A end of story,
i'm no chemist and don't concern myself with how a product does what it does,
if it works good and doesn't kill me or my customers i'll use it.
I am not an automobile mechanic nor do i totally understand how they work, I just know i get in, turn the key, the thing starts, i put into gear and drive. Don't care how it does it but only that it does. That was just an example, maybe not a good one but i think maybe i made a point.

Nice analogy about the car Kevin.

Speaking of cars. I'd love to own a Porsche (not likely going to) but it's a nice dream. But if we picture the design, styling, engineering, and road handling of a Porsche... how did it get there? Simple. A Porsche is the product of of brilliant design! And it's true that even if I had my dream Porsche, I wouldn't know, or care to know, about all the creative energy and science that went into making the car perform like it does. But perform it does! That's what matters.

Same thing with the products we use in our industry. It isn't absolutely necessary for you to understand the nuts and bolts that make the products work the way they do. What you're hoping to purchase is PERFORMANCE. You expect results. And results is something you can measure within the framework of your own real world business experience. So just like the Porsche, give encap a test drive, see how it handles on your roads (er carpets). That's where the rubber meets the road. If you'd like to give Releasit a test drive, head on over to www.TryReleasit.com :)
 
  • Like
Reactions: WillS

kevinj6121

Member
Joined
Jun 7, 2014
Messages
319
Location
Calabash, NC
Name
kevin
Nice analogy about the car Kevin.

Speaking of cars. I'd love to own a Porsche (not likely going to) but it's a nice dream. But if we picture the design, styling, engineering, and road handling of a Porsche... how did it get there? Simple. A Porsche is the product of of brilliant design! And it's true that even if I had my dream Porsche, I wouldn't know, or care to know, about all the creative energy and science that went into making the car perform like it does. But perform it does! That's what matters.

Same thing with the products we use in our industry. It isn't absolutely necessary for you to understand the nuts and bolts that make the products work the way they do. What you're hoping to purchase is PERFORMANCE. You expect results. And results is something you can measure within the framework of your own real world business experience. So just like the Porsche, give encap a test drive, see how it handles on your roads (er carpets). That's where the rubber meets the road. If you'd like to give Releasit a test drive, head on over to www.TryReleasit.com :)

Thanks for the offer to try releasit for free Rick but i won't take advantage of your offer just to get something for free as I already have and use your products, mainly the ds2 and hydrox both of which work very well and are top of the line quality products, sun-belt USA in North Carolina carries your stuff and since i live in NC thats usually where i get them.
 

DAT

Member
Joined
Apr 3, 2017
Messages
6,485
Location
Nevada
Name
Bill Cheryl
Nice analogy about the car Kevin.

Speaking of cars. I'd love to own a Porsche (not likely going to) but it's a nice dream. But if we picture the design, styling, engineering, and road handling of a Porsche... how did it get there? Simple. A Porsche is the product of of brilliant design! And it's true that even if I had my dream Porsche, I wouldn't know, or care to know, about all the creative energy and science that went into making the car perform like it does. But perform it does! That's what matters.

Same thing with the products we use in our industry. It isn't absolutely necessary for you to understand the nuts and bolts that make the products work the way they do. What you're hoping to purchase is PERFORMANCE. You expect results. And results is something you can measure within the framework of your own real world business experience. So just like the Porsche, give encap a test drive, see how it handles on your roads (er carpets). That's where the rubber meets the road. If you'd like to give Releasit a test drive, head on over to www.TryReleasit.com :)
Whats dry time like on the releaseit hydroxyl and other chems? Dry as fast at encap 02 from bridgepoint?
 

WillS

Supportive Member
Joined
Feb 21, 2013
Messages
1,258
Location
Las Vegas NV
Name
Will
Nice analogy about the car Kevin.

Speaking of cars. I'd love to own a Porsche (not likely going to) but it's a nice dream. But if we picture the design, styling, engineering, and road handling of a Porsche... how did it get there? Simple. A Porsche is the product of of brilliant design! And it's true that even if I had my dream Porsche, I wouldn't know, or care to know, about all the creative energy and science that went into making the car perform like it does. But perform it does! That's what matters.

Same thing with the products we use in our industry. It isn't absolutely necessary for you to understand the nuts and bolts that make the products work the way they do. What you're hoping to purchase is PERFORMANCE. You expect results. And results is something you can measure within the framework of your own real world business experience. So just like the Porsche, give encap a test drive, see how it handles on your roads (er carpets). That's where the rubber meets the road. If you'd like to give Releasit a test drive, head on over to www.TryReleasit.com :)

Boom!
 

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,162
Location
Ne
Name
Jimmy L
How's that song go..............."How long......has this been going on?"


ZzZzZZzZZzzzzz!
 
  • Like
Reactions: Shorty

Latest posts

Back
Top Bottom