Carpet cleaning nerd

Meter Maid

The Undetective
Joined
Nov 29, 2017
Messages
3,860
Location
Dayton,Ohio
Name
Chris
its actually arrived?




prepare yourself to be frustrated with the jets/manifold position.


hope you're handy..
I already adjusted the Jets closer to the glide, what else don’t you like about the manifold? The outside jets do seem a little close to the outside.
 
Joined
Oct 7, 2006
Messages
18,851
Location
Benton KY USA
Name
Lee Stockwell
One of our BENTley wand manifolds had to be cut and re-welded to get the jets in the same plane and equally spaced. The other had similar.
 
Joined
Oct 7, 2006
Messages
18,851
Location
Benton KY USA
Name
Lee Stockwell
In other words, you bought the wrong wand. Idiot !
Nah, almost ten years ago got them cheap from disgruntled original owners. The vacuum side ergonomics and efficiency was first rate at the time. We knew what we were getting as far as the spaghetti manifolds. Perhaps their welding fabricator didn't use jigs?

Both semi retired now.
 

hogjowl

Idiot™
Joined
Oct 7, 2006
Messages
49,321
Location
Prattville, Alabama
Nah, almost ten years ago got them cheap from disgruntled original owners. The vacuum side ergonomics and efficiency was first rate at the time. We knew what we were getting as far as the spaghetti manifolds. Perhaps their welding fabricator didn't use jigs?

Both semi retired now.
That wasn’t about you, Chavez
 

Meter Maid

The Undetective
Joined
Nov 29, 2017
Messages
3,860
Location
Dayton,Ohio
Name
Chris
I really like the way it cleaned today, it really pulls in some air.

I also ordered a Dang v4, should arrive Monday.

this should be good
 

Dolly Llama

Number 5
Joined
Oct 7, 2006
Messages
31,225
Location
North East Ohio
Name
Larry Capitoni
ou know I’m talking about a Mach 12, not a Bentley?


no one cares.
The Devistrada is the board de jour phenom wand now.
every other wand is a POS compared to it

Butt stay tuned, there will be a "new improved" de jour Excaliber for the knights of the round rug

while in consultation with Merlin, he said,

"In three, watch and see "

..L.T.A.
 

Meter Maid

The Undetective
Joined
Nov 29, 2017
Messages
3,860
Location
Dayton,Ohio
Name
Chris
Didn't you already have a Conway? that you didn't like?

So you but the knock off version thinking it will be better?
No, it was a beautiful wand, I just prefer a 2 inch tube. I can’t get 2 inch Devastator, so I got a dang. The version that uncle Joe is building for people is getting rave reviews and nobody is reporting any issues. I know a couple guys that had older devastators and are saying uncle Joe’s wand is top notch.
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
115,997
Location
The High Chapperal
No, it was a beautiful wand, I just prefer a 2 inch tube. I can’t get 2 inch Devastator, so I got a dang. The version that uncle Joe is building for people is getting rave reviews and nobody is reporting any issues. I know a couple guys that had older devastators and are saying uncle Joe’s wand is top notch.
2 tube, 12" head?


Tom makes that.




btw, "Uncle Joe" WILL screw you someday.




keep in mind, MOST carpet cleaners dont have a clue about equipment, especially wands.
 

Meter Maid

The Undetective
Joined
Nov 29, 2017
Messages
3,860
Location
Dayton,Ohio
Name
Chris
2 tube, 12" head?


Tom makes that.




btw, "Uncle Joe" WILL screw you someday.




keep in mind, MOST carpet cleaners dont have a clue about equipment, especially wands.
The dang is 14” 2”.

When I bought my 12” Devastator, the 2” tube wasn’t a thing.
 

Meter Maid

The Undetective
Joined
Nov 29, 2017
Messages
3,860
Location
Dayton,Ohio
Name
Chris
Baby that swivel...

and kick yourself on the ass for buying a malicious knock off...
Nobody is babying that swivel, apparently Joe’s version 4 ironed out the rough spots.

I probably would’ve bought 2 inch tube Devastator if they were available.
 

Latest posts

Back
Top Bottom