Waste tank leak

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
Jumped in the back of the van to get a tool the other day and heard the leak. Thinking about putting in the WM waste tank and hose reel. Might change the water tank too and sell the pair of tanks.
Put duck tape on it for now.

20210414_134418.jpg
 
  • Like
Reactions: Cleanworks

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,162
Location
Ne
Name
Jimmy L
The bottom of my tank started to leak. Poured a gallon and a half of Flex seal liquid into the bottom and drove around so it could self level.
Did the trick! But I first power washed it out and stuck a fan so it blew from the top to dry for a couple days. Then after I poured the flex seal I left the fan blowing in it for 3 days.

I would try a form of flex seal on that crack first. They have thicker stuff for vertical surfaces. Just don't use the spray.
 

hogjowl

Idiotâ„¢
Joined
Oct 7, 2006
Messages
47,883
Location
Prattville, Alabama
The bottom of my tank started to leak. Poured a gallon and a half of Flex seal liquid into the bottom and drove around so it could self level.
Did the trick! But I first power washed it out and stuck a fan so it blew from the top to dry for a couple days. Then after I poured the flex seal I left the fan blowing in it for 3 days.

I would try a form of flex seal on that crack first. They have thicker stuff for vertical surfaces. Just don't use the spray.
Dang Koko
You almost had me thinking your smart
Then I remembered your Blue Board posts
 
  • Wow
Reactions: Mikey P

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
Is that a kodak picture that you took and scanned in your printer to upload it on here?

Cell phone cameras should be a little better picture if you want to try that, lol
Nah I need glasses and a better camera.
 

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
The bottom of my tank started to leak. Poured a gallon and a half of Flex seal liquid into the bottom and drove around so it could self level.
Did the trick! But I first power washed it out and stuck a fan so it blew from the top to dry for a couple days. Then after I poured the flex seal I left the fan blowing in it for 3 days.

I would try a form of flex seal on that crack first. They have thicker stuff for vertical surfaces. Just don't use the spray.
I'm yanking it when I get the gumption. I miss the WM.
 
  • Like
Reactions: Lee Stockwell

Edward Arnold

Member
Joined
Apr 15, 2021
Messages
7
Location
North Carolina
Name
Edward Arnold
Two pieces of aluminum angle. Clean and surface inside and out degrease. Red RTV inside and outside and bolt through angle and waste tank. let it set up. Then go back to work.
 

Latest posts

Back
Top Bottom