2008 Butler System RPM and speed control issues

[Cleanworks]

Is that the small black knob on the tach itself that you can twist with a flat head screwdriver?

Twist it and see.

 

[Andrew from Simply Clean]

Someone else on truckmount forums seems to think it's the belts..so a few people have thought of it too...i just don't wanna adjust anything until I try the new belts on Tuesday

 

[Lee Stockwell]

MB has more experienced Butler users than any FB group or other forum.

 

[Andrew from Simply Clean]

MB has more experienced Butler users than any FB group or other forum.

I agree I just wanted as many suggestions as possible...plus I get some products from T.M.F that are good

 

[Lee Stockwell]

I have no use for the owner of that board. Pity the newbies there.

 

[Andrew from Simply Clean]

I have no use for the owner of that board. Pity the newbies there.

Hey everyone is a newbie at some point haha I've been doing this for awhile and I'm still learning new stuff

 

[steve_64]

My butler was acting funny, the pressure would build then drop over and over and then a line started leaking real bad. Replaced that line and all is good again.

 

[Desk Jockey]

I get some products from T.M.F that are good

Private labeled Interlink chems

 

[Jimmy L]

But while saiger's chems are made by Harvard Chem. I do believe Rob's is made by Fabpro. I could be mistaken

 

[Desk Jockey]

But while saiger's chems are made by Harvard Chem. I do believe Rob's is made by Fabpro. I could be mistaken

Have you seen the latest tm he is pushing? lol

 

[BIG WOOD]

I’m thinking about getting a close up look today

 

[Desk Jockey]

It looked solid, just dated.

Heat from secondary fuel, high pressure pump, blower...diamond plate and an oil barrel.

 

[Mark Saiger]

It looked solid, just dated.

Heat from secondary fuel, high pressure pump, blower...diamond plate and an oil barrel.

2 air cooled Motors... And wait for it....




2 barrels!


Set at 20 hg

 

[Desk Jockey]

Saiger" data-source="post: 4575849" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

2 barrels!

 

[Cleanworks]

Just what every cleaner needs. A double barreled truckmount

 

[Andrew from Simply Clean]

Just what every cleaner needs. A double barreled truckmount

Lol

 

[Andrew from Simply Clean]

Problem solved! There is a T shaped connector that splits the windshield washer style tubing from the blower and plugs into the back of the vacuum gauge as well as the vacuum switch for controlling operation speed (RPM) and mine was unplugged! A simple fix that didn't cost me anything! The Rpms held perfectly on just the right setting all day

 

[Matt Middleton]

There is nothing like looking when you want to find something.

Happy that you got it fixed!

 

[Desk Jockey]

I need to check ours and see if it's is connected.

 

[Andrew from Simply Clean]

I need to check ours and see if it's is connected.

Also Sometimes the small tubing can have a leak or be clogged it's only like 5 bucks to replace it if necessary. Good luck!

 

[Doug Cox]

It's gotta be something..and every time I call Butler they can't wait to hang up on me

That is the saddest statement I heard about a company in a while. Come to think of it, I'm wrong. It was just a month or so ago when Mark was dealing with his van. Hmmmm?

 

[Andrew from Simply Clean]

That is the saddest statement I heard about a company in a while. Come to think of it, I'm wrong. It was just a month or so ago when Mark was dealing with his van. Hmmmm?

Butler makes a good machine my only complaint is the prices for parts are really high and sometimes customer service in my experience isn't the greatest. I solved the problem on my own. Why couldn't they mention the tubing? Idk