Battle Of The Direct Drives @ Vegas MFE!

[Giorgio]

well i DID tweak it a little bit,,,
View attachment 4606

Bawb,

Can you mount that TM on a trike chassis with a comfy seat, 60 series tires and a set of ape hangers for me?

I'd love to smoke the tires between job sites!

Damn! ;-)

 

[Mikey P]

Big Jim, I.was talking to Lou at Cleanco today...
They have a 2.5 lid option for the waste tank.

Yes, it will be there..

 

[GCCLee]

Hey Bawb,

Does that Genie tank have the Two 2" ports?



And Of Course I want it..............................

Hardest Part,
Thou Shall Not Want.....

 

[GCCLee]

 

[Jimmy L]

2.5 lid option big wow. Just go down to the hardware store and pick up some pvc piping and make your own.

 

[bob vawter]

how would you enlarge the 2" holes up to 2 1/2"?

 

[Mikey P]

Hole saw?

 

[dgardner]

plasma cutter....

 

[bob vawter]

Mikey ..you can't use a hole saw if there already is a 2" hole there...a plasma cutter is the only way...i doubt if many of yous have one!

 

[Mikey P]

He would have to buy a new lid

 

[GCCLee]

Mikey ..you can't use a hole saw if there already is a 2" hole there...a plasma cutter is the only way...i doubt if many of yous have one!

nope, but i like em. just make sure u dont drop the head! : )

 

[JS41035]

Mikey ..you can't use a hole saw if there already is a 2" hole there...a plasma cutter is the only way...i doubt if many of yous have one!

Just quick clamp a piece of plywood to the bottom of the lid. Then center your hole saw with the wood and drill out the 2.5 hole.

 

[bob vawter]

Justin...you'd need a rather large clamp to fit on most tank lids

 

[JS41035]

Naa just cut the plywood a bit smaller than the lid and clamp it where you can. Or buy some really deep vise grip clamps. About 30 bucks. Still cheaper than a plasma torch.

 

[hogjowl]

A lifetime of illegal drugs has had an effect.

 

[bob vawter]

be that as it may.......are you talking about a C clamp?
a real TM lid would require a really large one...unless the holes were near the edge

 

[bob vawter]

shut up Art.......

 

[bob vawter]

i'll tell yous all one thing....this last Genie i sold got hotter than a two peckered billy goat....
i would give anyone $10 if they could hold the QD at the wand on a 100 foot run for fi seconds......and you WOULD have ta go to the hospital afterwards.......
i was cleaning an entrance mat on the driveway...about 89 or ninety degrees weather......steam every where....the guy rips his pocket getting my full asking price out.......

 

[hogjowl]

Big foot ...

 

[Desk Jockey]

got hotter than a two peckered billy goat....

 

[JS41035]

 

[bob vawter]

nice Justin....!

 

[GCCLee]

He's correct Bawb : )

 

[bob vawter]

yes i can see that he takes after his ol' man......

 

[Captain America]

How does a pto. Heat different than a slide in hx.
Do these butlers use a heat exchanger off the engine manifold.
And does it give more heat than say a 35 hp on a slide in with a hx.
Cap

 

[Desk Jockey]

radiatior heat exchanger. its hot and instant since driving to the job has it ready to go. Buy the Max heat second heat exchanger and you will be amazed at the output.

 

[SamIam]

Pto atm run around 210 just off the van the mAx heat kick gets them to 240 ish.

 

[Cleantechsk]

When is this competition happening ?

 

[Mikey P]

We'll have them running for a couple hours today if you're here..