Bricks that are walked on

[BIG WOOD]

more like 6 or 7 days...

So far, this looks like the best stripper. If I could paint this on in 100sq. ft. sections and let dwell for 30min, that would speed the job up really fast.

3i Supply - Uni Stripper - 5 Gallon

This unique stripper is used to remove all kinds of sealers. It is able to remove multiple layers with just one application. Removes: Latex/Water-Based Finishes - Alkyd/Solvent-Based Finishes - Water & Solvent-Based Stains - Urethane Varnishes & Coatings - Lacquer Finishes - Clear Sealers -...

3isupply.net

 

[jcooper]

Can you enlighten me on why it'll take 6-7 days?

Why am I looking at this wrong?

The stripper is not going to work well if at all.

 

[BIG WOOD]

The stripper is not going to work well if at all.

When they’re ready to get this done, a test will be done in an area before I dedicate to the job

 

[Fat Mike]

So far, this looks like the best stripper. If I could paint this on in 100sq. ft. sections and let dwell for 30min, that would speed the job up really fast.

3i Supply - Uni Stripper - 5 Gallon

This unique stripper is used to remove all kinds of sealers. It is able to remove multiple layers with just one application. Removes: Latex/Water-Based Finishes - Alkyd/Solvent-Based Finishes - Water & Solvent-Based Stains - Urethane Varnishes & Coatings - Lacquer Finishes - Clear Sealers -...

3isupply.net

Most strippers are gonna work fine Matt, the way to do these floors are multiple strippings per each area. It’ll usually only get off a layer or two at a time. The hardest part will be the last 10-15% of finish on the floor. Patience is the biggest part of these. Not at all like tile and grout

Floor finishing application is also good too protect it from resoiling and scratches

 

[Shane T]

I wonder if it would be possible to use the Dustless Blasting system on something like that. Have to do a lot of plastic and taping.

https://www

.dustlessblasting.com

 

[Kenny Hayes]

Wow, you all make a mountain out of a molehill. Do a test patch stripping the bageezuz out of it and let owner decide what finish if any they want. It’s a floor for crying out loud. It was only new once Ma’am

 

[Trip Moses]

Pour the stripper onheavy and cover with plastic so it doesn’t dry too fast.