butler owners..got a tune up question

[davegillfishing]

i have a 07 1 tone gmc. has 87k miles and 3200 hrs on unit.
that comes out to close to 200k miles on engine. i am a maint nut but
i think it is time for a tune up, plugs and all..
are you guys taking the drive shaft off or sliding it back or how are you
getting to the plugs?
thanks
dave

 

[bob vawter]

http://www.thetoolwarehouse.net/p-5604- ... -4480.aspx

 

[kendallsdad]

The driveshaft doesn't interfere with getting to the plugs. You just have to remove the engine cover to gain access to the plugs. You do have to remove the two front seats to remove the engine cover.

 

[Dale]

Hi:

I've never done a 04 up Butler. However weve done plenty in prevous years. The dog house can be slid back without pulling the seats. You can lay in front of it and od engine work. But to get it out of the way completely, (if I own the van) I slice the shaft boot longways and lift the dog house out. Then I wire tie the shifter boot back together.

Thx,
dale

 

[davegillfishing]

i was figuring on having to cut the dog house to get her off and out of the way i just wanted to be
sure before we get to hacking..
i will also check out the link posted.
thanks
guys