Single 3 stage 94 cfm vac
Pumptec 250psi pump.
Heater would be better used as a pre-heater and let cycle back into the fresh tank for 20 mins, prime the pump and heater
before turning it on, then allow heater to warm up for 5 mins. before cycling the full flow back to the tank, even better if you can fill with hot water to start.
The bladder system between fresh and waste is a little weird, probably fine til it beaks.
The three jet castex wand really needs a
glide, just don't tell jimmy.
You probably aren't getting better than 100psi from it because of the size of the jets on the wand, you gotta figure out what you want, smaller jets for more pressure, less flow, possibly more heat if you follow instructions, or larger jets (likely already has 110 015 jets) for more flow and less pressure.
The 25' of 1.5" hsoe is fine, if you need to reach futher, convert it to 2" hose right to the wand.