Devastator Wand Upgrade?

[D Luke]

So which one of these is going to solve all of my problems?

 

[Mark Saiger]

So which one of these is going to solve all of my problems?

View attachment 90633

I would start with the anti seize

 

[KevinD]

Anti-seize is great for metal parts and heat but I would still stick with a high temp silicone grease where o-rings are involved.

 

[DAT]

As far as I'm concerned, acid rinsing is idiotic unless you are doing corrective cleaning. If you really feel you need to counteract the alkalinity of your prespray, use a neutral pH rinse such as prochems axiom extraction detergent. pH is 7.5-8.5, close enough. You will get better cleaning results and if you take a pH meter to the wet carpet 20 minutes after you finish rinsing, it will be close to neutral. Much easier on your equipment.

Is that what you use?

 

[Cleanworks]

Is that what you use?

No I use procyon plus powder for my rinse on most carpets. Procyon Extreme for my prespray. I have tested the wet carpet after cleaning with a pH pen and ph paper and I get results close to neutral. You have to remember that the bulk of the soil in carpet is acidic.

 

[Desk Jockey]

Anti-seize is great for metal parts and heat but I would still stick with a high temp silicone grease where o-rings are involved.

Super works well on o-rings.