Dryer Beware

Mikey P · Oct 8, 2013

Dryer Beware Roughly 70 percent of the professional restorers that I personally know, began offering mitigation and drying as an extension of their carpet cleaning service. It doesn’t surprise me in the least bit, after all that is how I got involved in the restoration industry. Though I have no hard evidence industry wide of ...
The post Dryer Beware appeared first on .

More...

GCCLee · Oct 8, 2013

Everyone should read this!

Desk Jockey · Oct 8, 2013

Here is a link to a PDF about assessing drywall for damage. Notice it clearly states drywall must be removed when affected by sewage or flood waters.

http://www.homedepot.com/hdus/en_US...ll_Assessing_Water_Damage_to_Gypsum_Board.pdf

This allows you to diagram the affected area of the walls.

SMRBAP · Oct 8, 2013

Anyone who is doing water extractions in apartments and not drying to standards - you are leaving yourself wide open for big trouble. Any commercial situation in fact.

Had they had their carpet cleaner or hired restoration firm to do that and directed the work to the cheap - that company would have been co-defendant in the case for certain.

Half the resi water loss jobs we do have had previous losses - and half of those you can clearly see the firat loss was dried improperly. It is a huge problem here. As long as there is a check to cash - there is always someone willing to step out of their boundaries to cash it.

Desk Jockey · Oct 8, 2013

Good point Anthony, CYA!

Document all you can, get "refusal of recommendations" signatures even if it's hand written.

WALL DRYING- If they cannot or do not want to have wall drying done, that’s okay, we are there to help, not to just make money off the loss. If they are non believers in wall drying, don’t get offended, just let them know they have three choices. (Only two of those are wise choices)

1) They can let us professionally dry the walls.
2) They can have the walls removed and replaced.
3) They can leave it as it is, which we do not recommend!
The probability of mold and related odors is good.
We need a release signed protecting the company, a written diagram and thermal shots if they choose this option.

We are not trying to scare them into anything, but rather save ourselves from a lawsuit.

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKerning/> <w

ontFlipMirrorIndents/> <w:OverrideTableStyleHps/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->

SMRBAP · Oct 16, 2013

Still a wall for lawyers to throw spaghetti at in my eyes - and my lawyers. He cited the cases and examples (which I fully ignored other than the point which was just stay away from those situations).

I do remember one of the analogies he gave me - surgeon abides by a hospital protocol that puts patient at risk. Patient is harmed due to that protocol. Hospital is the primary defendant, Dr. is the secondary.

Negligence - Dr. knew better.

Dryer Beware

Mikey P

Administrator

GCCLee

Supportive Member

Desk Jockey

Member

SMRBAP

Supportive Member

Desk Jockey

Member

SMRBAP

Supportive Member

Picture of the Day!

Latest posts

Latest Auctions

Picture of the Day!