Dual Wanding with the Pro1200SE

[Mike Draper]

I run my Kubota @ 2,800 rpm's as well.

 

[Nampa Carpet Cleaning]

You have a Kubota on your Mad Max machine?

 

[Mike Draper]

yep, same as apex or 570

 

[SamIam]

the prochem 405 spins at 2650 rpm and produces 405 cfm its really a 4.7 blower so maybe your right about some blowers spinning slower producing more Mike.

 

[Nampa Carpet Cleaning]

The Blower is spinning at 2650 ? Yep you are right It is.


405 Blower PUMP, VAC 4M-L

it looks like the same blower that is now in the Legend GT and advertised at 330 CFM

Prochem Truck Mount Vacuum Blower Pump
Used on:Prochem - Bear, Bruin, Bruin II, Legend SE, Legend XL, Legend AD, & Performer.Bridgepoint - Lancer & Lancer II (2)Legend GT 4M-L

http://www.***************/gardner-...merly-86190700-4mrrhc-pp41905021-p-12464.html

 

[SamIam]

Actually that is a 4.5 blower the performer had the smaller blower the performer 405 has a bigger blower.

not a 4ml but a 4ll

http://www.***************/gardner-...blower-pump-86190710-gacldra0084-p-12466.html

http://www.jondon.com/vac-blower-4lp.html

http://interlinksupply.com/index.php?Products=Parts&SubCategory=Vac Blowers

 

[Mike Draper]

the tuthill and roots spin slower

 

[AshleyMckendree]

@Nate The Great Not yet, But I do mostly run it on LOW single wanding.

I have no doubts it can dual wand at all. air flow is insane

 

[AshleyMckendree]

The Pro 1200 SE is spinning its 408 HeliFlow at 3600 RPM. with the van at 1400 RPM. (High)

 

[Mikey P]

I wish I could recall what the C4 was spinning at.


It was plenty, but not insane.

 

[Scott S.]

I'm happy with the Pro1200SE's performance. It does what they say, and does it well.

 

[D Luke]

The Pro 1200 SE is spinning its 408 HeliFlow at 3600 RPM. with the van at 1400 RPM. (High)

Not that it's a significant difference, but I think the upgraded larger clutch slows things down a bit compared to the original smaller one.

I think they said blower speed with upgraded clutch at 1,500 rpm is actually a bit slower than original at 1,400.

It doesn't matter at the end of the wand though, still crazy airflow.

 

[Able 1]

Wouldn't a bigger pulley make it run faster?

 

[Scott S.]

the actual drive shaft doesnt spin very fast at all when the machine is on high.

 

[Lee Stockwell]

Wouldn't a bigger pulley make it run faster?

In any belt driven system increasing the DRIVING pulley increases the speed.

Increasing the diameter of a DRIVEN pulley reduces speed.

 

[Lee Stockwell]

You could slightly INCREASE the pulley diameter on the opposite end of the drive shaft.

 

[Bob Savage]

Dual wanding ROCKS!!!!

 

[Mikey P]

yes it does.

 

[rwcarpet]

Haven't dual wanded with my Pro1200 yet. actually just started using it after a month of dealing with a few issues. Got a grand total of 24 hours on it after this mornings 6 floor high job, 350 foot hose, hi speed. 220+* on a 9 flow Ti wand. Almost insane vacuum! I wish there was 2 - 2.5 ports. Right now there is 1 - 2' and 1 - 2.5".

 

[Scott S.]

going to dual wand a place tonight, if I can ill make another video.

 

[Scott S.]

going to dual wand a place tonight, if I can ill make another video.

Well my helper was a no show, no call off, nothing. So no dual wanding. Sorry guys.

 

[Chris A]

Well my helper was a no show, no call off, nothing. So no dual wanding. Sorry guys.

Gotta Love that!

 

[Scott S.]

Gotta Love that!

This morning he blamed it on his gf. I really wanted to be like, "when did she start working for me" think to many young people just dont care about work ethic.

 

[Chris A]

God Damn kids these days...

 

[Scott S.]

God Damn kids these days...

sad part is he is only a couple years younger than me.

 

[rwcarpet]

Well my helper was a no show, no call off, nothing. So no dual wanding. Sorry guys.

I've been there Scott!! Have a big job planned and helper calls and said "I'm Siiiiick this morning". You shoulda called me....I could have ran out and gave you a hand and we both coulda tried out the dual wanding. I'm not far away.

 

[Jim Pemberton]

I've been there Scott!! Have a big job planned and helper calls and said "I'm Siiiiick this morning". You shoulda called me....I could have ran out and gave you a hand and we both coulda tried out the dual wanding. I'm not far away.

....and Bob probably could outwork any "kid" who is kept from working by his girlfriend....

 

[Scott S.]

I've been there Scott!! Have a big job planned and helper calls and said "I'm Siiiiick this morning". You shoulda called me....I could have ran out and gave you a hand and we both coulda tried out the dual wanding. I'm not far away.

i want to try out a 14 inch wand on the pro1200se.

 

[Scott S.]

Just a quick video, we were asked to knock this one job out super fast as they were going to setup for a party as soon as we were done.

 

[BLewis]

Sweet! And I want to add that I hate security doors! What a pain especially if your dual wanding!