For you VAC Brainiacs

[Brian R]

Ok,


I have three 2" ports on my filter box

If I run two 2" vac hoses from two ports down to a "y" (coming out 2")
Then run the third 2" vac hose to another "y" (2" to 2.5") along with the one 2" coming from the other "y"
will I get better vac then just running two 2" hoses to a 2" to 2.5" "y"?


I will call it 6 to the mix and 2.5 to the hand jive! 8)



Not really, I just wanted a stupid ass name like "4 to the door".

Really, woul it make a difference? I think I'm gonna try it.

 

[Mike Draper]

Why don't you have greenie just make you a fork, you know, instead of a Y you can have an fork with 3 two inch outlets leading to one port. I'm sure it wouldn't be to hard to make. I suppose it might look light a cactus when it's done. A tube up the middle with an arm on each side. :?

 

[Mike Draper]

then again, I doubt it would really make a difference on your POS!!!! Ha...lol :mrgreen:

 

[Brian R]

Thanks...I think.
I just have the parts to do it that way and thought I would ask.

Originaly I was just going to use 2 ports into a "y" that heads out with 2.5"

but I thought...more is better right?? :?

 

[John Watson]

What size ho ya got going into yo box? That will tell ya what ya can suck wid it..

 

[Brian R]

It's a fat one. 3" at least.
I know the hole coming out of my filter box is 3"..it has three 2" ports on it.

 

[John Watson]

Then youse can runs 4 1 1/2's or 3 2inchers wid out overloading yo ass.

in all fairness to your question, yes 3 2 in would be better than 2. I would have Greenie make me a 3 2 in to a 2.5 adaptor

 

[Out of Character - 0]

Unscrew the cap, Put a 3"90 followed by a 3" to 2.5" reducer, add a slip connector, go suck something.

 

[Brian R]

Unscrew the cap, Put a 3"90 followed by a 3" to 2.5" reducer, add a slip connector, go suck something.

That was the original original plan but I have the parts for this one.



I think it WILL look like a flux capacitor when I am done. Then the flux capacitor guys can all make fun of me.

 

[Brian R]

Oh, I should make all the short hose clear and then it will be a flux capacitor. YAY!