Fuel Pump???

breathe72

Member
Joined
Oct 18, 2007
Messages
355
New trouble:

Truckmount dies while on a job this morning.

Go outside to restart and notice that when I switch the key over, there is no noise coming from the fuel pump.

Mine makes enough noise to where I've always heard it pumping if the key is engaged one click prior to 'start'.

Today.... nothing. no noise, not a peep.

Followed the fuel line to the floor of the van, along with the wiring, and apparently it is mounted beneath a plate or bracket, on the unerside of the van floor, just above the fuel tank? anyway, i jiggle the wiring a little and the fuel pump is working again.

Or at least working FOR NOW
 

Chads

Supportive Member
Joined
May 17, 2007
Messages
1,331
Just a bad connection I would check the ground there should only be two wires that feed that fuel pump.
 

kelsolo

Member
Joined
Jan 11, 2009
Messages
13
Same thing happened to me about 2 weeks ago was at a job and my peak quit. Took it home removed the gas line from carb and turned key on no fuel. So got under van took the plate off over the pump grabbed the power wire and the connector feel into my hand.Redid it and was back in busniess again. Lesson learned.
 

breathe72

Member
Joined
Oct 18, 2007
Messages
355
admiralclean said:
Is there a question in there somewhere?

Are all you Nebraskan people weird?


I just sort of threw it out there, Marty.



Nebraska people are weird if you get outside of Omaha.

I'm from California, so these folks out here seem pretty mild to me.
 
G

Guest

Guest
breathe72 said:
admiralclean said:
Is there a question in there somewhere?

Are all you Nebraskan people weird?


I just sort of threw it out there, Marty.



Nebraska people are weird if you get outside of Omaha.

I'm from California, so these folks out here seem pretty mild to me.

Marty is just jealous,you are probably a lot younger,better looking and have alot more hair :D Oh and you are from california
 

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,175
Location
Ne
Name
Jimmy L
He probably can't speak english marty since he's from Kalifornica marty.
:shock:
 

breathe72

Member
Joined
Oct 18, 2007
Messages
355
Re: Fuel Pump??? PART II

So it was a corroded ground wire at the fuel pump.

I barely touched it and it just separated.

08012.jpg



Took me longer to find these nifty blue connectors at the auto parts store, than it did to do the repair in the parking lot.
08015.jpg
 
G

Guest

Guest
Walrus said:
He probably can't speak english marty since he's from Kalifornica marty.
:shock:
You are studdering there Jimmy,did you get that from your daaaaaaad :D
 

Able 1

Member
Joined
Apr 12, 2008
Messages
6,469
Location
Wi
Name
Keith
If the wire is exposed to the eliments I would solder the wires together, and heat shrink tube them so moisture can't get to it.. That will last 10 times longer then any connector.
 

breathe72

Member
Joined
Oct 18, 2007
Messages
355
Able 1 said:
If the wire is exposed to the eliments I would solder the wires together, and heat shrink tube them so moisture can't get to it.. That will last 10 times longer then any connector.


Done deal. Thanks!
 

Latest posts

Back
Top Bottom