got a steal on a propane stripper

[juniorc82]

Picked it up with 8.6 hours on it. New around 6500 , bought it today for 2750. Ready to do some serious strippin now 32'' path, and the thing weighs a ton so Im sure the exttra pressure on the heads will give some monster scrubbing. Got 2 big strip jobs comin up in about a month. Cant wait http://s1359.photobucket.com/editor...t/media/stripper_zpsbe033d21.jpg.html?filters[media%5Ftype]=image&sort=3&o=0

 

[Desk Jockey]

Wow that is a great deal!

 

[floorguy]

once you go propane you never go back

 

[alazo1]

So you actually sand the vct coating with these things?. What abrasives are used?.

 

[juniorc82]

Instead of stripping with a pad these machines use a brush, you still wet strip the floor with stripper it just eliminates a cord, gunked up pads, and due to the pressure on the heads it alot moore agressive than a 175. Iwont get to use it for another week but I am certain it should cut the time I spend stripping a large area in half if not by more. I will take pics or a video of the job

 

[Jeremy]

Nice! Let me know if you need a 20" & 27" Burnisher and an autoscrubber to go with it...

 

[juniorc82]

Nice! Let me know if you need a 20" & 27" Burnisher and an autoscrubber to go with it...

If the price is right I would give some thought to it

 

[alazo1]

Instead of stripping with a pad these machines use a brush, you still wet strip the floor with stripper it just eliminates a cord, gunked up pads, and due to the pressure on the heads it alot moore agressive than a 175. Iwont get to use it for another week but I am certain it should cut the time I spend stripping a large area in half if not by more. I will take pics or a video of the job

Thanks for the explanation. Thing goes at 320rpm too. Eagle makes some big propane concrete grinders as well.