Green Glide tile psi??? Tips or tricks

Mr Brightside

Member
Joined
May 4, 2019
Messages
847
Location
Southern Cali
Name
Jay Wags
First day using so far let solution (saigers) sit for 10 and extracted at 400psi it worked! I just wonder if I need more psi or less

Any other tricks will be appreciated

84A4AA43-587B-4BD2-A91D-762F298451A2.jpeg
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
112,308
Location
The High Chapperal
you need what you NEED.

  • Some floors clean up great at 200 psi, some need 700, if you need more than that, use a spinner
  • Deep grout lines respond better when worked at an angle. (less splashing)
  • Some floors clean better when spraying on the forward pass
  • Some better on the back pass
  • Some are both
  • Lippage that fvcks with the spinner and traditional HS wand, fvcks with the GGBG less, if ran at an angle to the grout.
  • All tools need a dry pass, even this one.
  • Step on you wand head on both sides of the tube to be sure the Glide is firmly seated.
  • Take off the back lip to make install and removal easier.



    I clean more hard surface than anyone here and I haven't used a spinners in over two years.
 
  • Like
Reactions: Giorgio

Mr Brightside

Member
Joined
May 4, 2019
Messages
847
Location
Southern Cali
Name
Jay Wags
you need what you NEED.

  • Some floors clean up great at 200 psi, some need 700, if you need more than that, use a spinner
  • Deep grout lines respond better when worked at an angle. (less splashing)
  • Some floors clean better when spraying on the forward pass
  • Some better on the back pass
  • Some are both
  • Lippage that fvcks with the spinner and traditional HS wand, fvcks with the GGBG less, if ran at an angle to the grout.
  • All tools need a dry pass, even this one.
  • Step on you wand head on both sides of the tube to be sure the Glide is firmly seated.
  • Take off the back lip to make install and removal easier.



    I clean more hard surface than anyone here and I haven't used a spinners in over two years.
I used it a lot today and I usually finish white a mop today I used 200psi and the wand it was fun
 
  • Like
Reactions: Giorgio

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
112,308
Location
The High Chapperal
Had a guy from NY call today asking if he could use a brushglide on a EVO 16 hooked to an Prochem Blazer+, that he uses the old 3" bumblebee vacuum hose with a ten ft 2" whip.
I told him to wait for my AW version.....
 
  • Like
Reactions: Mr Brightside

Latest posts

Back
Top Bottom