How can I free up a rusted blower?

[everfresh1]

Without taking it apart. I'm working on getting my Boxxer back up and running, but it's been sitting for over a year, now the blower won't move I put WD in and let it sit for over a week still won't budge :x

 

[Lee Stockwell]

viewtopic.php?f=103&t=34066&p=375666&hilit=hammer#p375666

 

[everfresh1]

http://mikeysboard.com/forum/viewtopic.php?f=103&t=34066&p=375666&hilit=hammer#p375666

Thanks Lee

 

[Lee Stockwell]

How did it go Jamie?

 

[everfresh1]

I'll let you know my machine is at the supplier right now they were putting a new engine in it, then ran into this problem. I couldn't do it myself the machine had to be pulled,and the heat exachangers removed to clean them out. this will be the 3rd engine!! are you sure about this degreaser thing?

 

[Erik]

Pour some kerosene in it and let it sit. worked for me once.

 

[bob vawter]

Pour some kerosene in it and let it sit. worked for me once.

AND it makes yor place SMELL so yummy too.......!

 

[everfresh1]

Pour some kerosene in it and let it sit. worked for me once.

Yeah, it's been soaking in Kero for a couple of days now. If that doesn't work we'll try the other stuff

 

[bob vawter]

Pour some kerosene in it and let it sit. worked for me once.

Yeah, it's been soaking in Kero for a couple of days now. If that doesn't work we'll try the other stuff

how's that working........soon it'll be throughout your whole house..........
what a dope....loosen the end plate bolts........

 

[Able 1]

I used a pipe wrench on the end of the blower shaft when mine froze up..

 

[everfresh1]

How did it go Jamie?

It worked... Soaked it for a few more days, still froze, hit it with the 2x2 like you said, freed it right up shiteatinggrin