Fred the top two are from a job a couple of years ago prior to us owning an E-TES. As you said pretty pictures, so I use them for marketing.
The third is typical of the setup we would use now.
Basically the same but with heat directed at the affected area.
REAL JOB:
The customer was fortunate the water didn't go very wide, most ran towards the camera.
We did have to pull the toe kick to get air into the box.
As far as dry all wood floors the same?
Well we would probably use the panels and heat, but every job is different. We have a bunch of different systems, we are going to generally use what's going to dry the fastest.
Here is an older setup, but we could do it this way if needed, but we prefer the panels.