NO......i just did two sets and getting ready to do the third one....
first you have to get all that UV protection OFF...this requires sanding it off.....
first tape off everything but the actual glass
THEN start with 600 grit wet dry sandpaper with a rubber pad underneath or you will get finger strokes in it....HORIZONTAL strokes only..get all the UV off like this then step up 1000 grit...same thing....use a lot of water...then go to 1500 grit then 2000 grit.......i usually buff with a wool pad and VERY mild
compound! but you dont have to if you use the 2000 grit they DO make a 3000 grit
take all the tape off and blow any water that might be present away....re tape and use paper to cover any surrounding paint........after you sand the headlite will still appear to be a little hazy...but the minute you spray the clear its lik magic...they look brand new and wii stay that way...go to a body shop suppy store and buy a rattle can of 2K glamour clear...its a special can that has hardener that you activate just befor you spray......take a clean micro towel and clean glass with rubbing alcohol...let dry and activate hardener and spray the 2K...don't drive fo a couple of hours...first coat lightly next coat a little more heavy third coat ...normal..
do not run the clear or you WILL have to start all over and them cans costs about 26 bucks
if you cheap out and buy the 1K single stage clear............
yor a moron!