The brine draw and discharge is very slow, a trickle. It seems clogged, like a foreign object was drawn into the head. Could be the missing o-ring on the brine-line elbow that I replaced today.
Fresh water pressure is good to the head.
Can't see a foreign object in the hole that the brine line elbow plugs into. Took the head apart as far as I could, and reassembled it, but didn't see an access to the chamber behind the hole. Might have to remove the head from the tank?
Tried positive-pressure flushing the draw line (pressure is positive before turning the timer knob) to flush anything out.
Anyone ever have this problem or have any insight? Or know where I can find a diagram of the head?
Does Hydraforce have a website? Can't find it.
Thanks,
John
Fresh water pressure is good to the head.
Can't see a foreign object in the hole that the brine line elbow plugs into. Took the head apart as far as I could, and reassembled it, but didn't see an access to the chamber behind the hole. Might have to remove the head from the tank?
Tried positive-pressure flushing the draw line (pressure is positive before turning the timer knob) to flush anything out.
Anyone ever have this problem or have any insight? Or know where I can find a diagram of the head?
Does Hydraforce have a website? Can't find it.
Thanks,
John
