C
Chads
Guest
I have a pro-chem trailblazer that has a new blower on it but need to get more performance any tips guys what would you do if this was your machine and don't say buy vortex or any of the other crap I'm just a poor boy
R
RichardnTn
Guest
Chad, Is the blower direct drive and what pump do you have....Richard
C
Chads
Guest
This is the water pump not sure what type it is
And the blower is belt driven
And the blower is belt driven
J
Jack May
Guest
Hey Chad, search for the 'Supercharging a Legend' thread in this room.
Lots of good info there and also some feedback from myself after I took the plunge and went 2.5 striaght from the tank.
Not sure how our two machines compare specs wise sorry.
John
Lots of good info there and also some feedback from myself after I took the plunge and went 2.5 striaght from the tank.
Not sure how our two machines compare specs wise sorry.
John
R
RichardnTn
Guest
Chad, you may be able to change the pulley on either the blower or the motor and up the rpms on the blower...max is probably 3600 rpm. You might think about a propane heater to supplement the HX. Also to achieve maximum air movement, search for vacuum mods...Hope ya getting 'er going the way ya want..Richard
S
steve g
Guest
I think adding a kunkle and bumping the engine RPM about 150 should help a lot
