Mikey P
Administrator
Extender Benders are selling very well these days, cleaners are figuring out that you don't need to spend $1500+ to get excellent flushing and drying performance...
I'm kinda proud of these things...
- Thread starter Mikey P
- Start date
Sierra Clean Care
Member
I need a couple sets for 2 AW29 wands.
Got a second TM, and duplicated the system..
Albeit, the second rig is 15 years older, it has the the same blower, and an equally good, if not better water pump.
I’m in the phase of hiring a Jamaican dude to dig deep nightly…
Got a second TM, and duplicated the system..
Albeit, the second rig is 15 years older, it has the the same blower, and an equally good, if not better water pump.
I’m in the phase of hiring a Jamaican dude to dig deep nightly…
Kenny Hayes
Member
Nice! I hope it works out.
Sierra Clean Care
Member
The dude has worked 7 days a week for the last 8 years to bring his family to Canada.
I’m pretty sure he has his eye on the prize…
Mikey P
Administrator
Let me see a nice clear photo of your current jet configuration on the wands in question
Nate The Great
Member
Everything irie!
SamIam
Member
Actually the grind is real
Mikey P
Administrator
Waiting for photos
Sierra Clean Care
Member
Just finished up my job, will take a pic before I pack up…
Sierra Clean Care
Member
Ok, here are the pics as per request…
No, I haven’t cleaned my wand today, and yes, I need to replace the jets…
Mikey P
Administrator
Sierra Clean Care
Member
That is correct, it is backwards…
It’s worn out, I’m trying to get a few more miles out of it…
Kenny Hayes
Member
A true carpet cleaner 
Mikey P
Administrator
That only works with motorcycle tires ...
Mikey P
Administrator
How high is the top of the head off the ground?
Sierra Clean Care
Member
I will have to measure when I get to the shop.
Mikey P
Administrator
There's a low profile version of the aw29 that I have not tested the extenders on, and depending on the angle of the photo taken it's hard to tell
Sierra Clean Care
Member
Ok, from the ground to normal height of holding the wand, it’s 5 1/4” off the ground to the top of the shroud.
Mikey P
Administrator
Sierra Clean Care
Member
2 slot glides, 2 sets of EB’s, and 2 sets of new stainless jets.
I’m assuming that the EB’s change the height of the jets, so…. 4 flow, and 110 angle???
Actually, one set 4flow, and one set 3 flow, the second wand for my porty…
I’m assuming that the EB’s change the height of the jets, so…. 4 flow, and 110 angle???
Actually, one set 4flow, and one set 3 flow, the second wand for my porty…
speaking of glides, have you made the prochem ti glide flat in the front yet to get closer to the wall?
Mikey P
Administrator
Working on it, unfortunately my beta is already spoken for..
Nate The Great
Member
Mikey P
Administrator
On its way to Montana..
