Just can't believe it

[Ron Lippold]

24 flow 500 psi just can't understand. Carpet is cleaner dryer so much faster. No streaks dry by the time we leave. You have to try it.

 

[Jim Martin]

what temps are you running and what is your therm oil set at........

 

[steve r]

damn jim dont confuse him hes jut a salesman for heavens sake.

 

[Ron Lippold]

750 at the machine 500 when the trigger is keyed oil temp 295 constant temp at the machine 220-230. the wand is heaver and hotter cleaner and better.

Tell me what Im selling other than clean.

 

[RichardnTn]

Wow, That's 8 1/2 gpm...what kind of pump are you running....
06 @ 500psi =2.1 gpm X 4= 8.4 gpm
Is the pad wet at that rate...are you checking them occasionally ?
Thanks Richard R

 

[Greenie]

Wow, That's 8 1/2 gpm...what kind of pump are you running....
06 @ 500psi =2.1 gpm X 4= 8.4 gpm
Is the pad wet at that rate...are you checking them occasionally ?
Thanks Richard R

Richard, what makes you think 06 flow = 2.1 gpm?

Put your wand in a bucket and report back your findings.

 

[Brian L]

I don't want to brag or anything but I have two 05's on my 802.



Eat your heart out Lippold.

 

[RichardnTn]

Technically 500 psi with an .06 jet is 2.12 gallon per minute.
If you will check Envirospec or Spraying Systems or any other company that supply jets, you will find a jet size/psi/volume chart. Any other result other than this, would suggest that the psi, jet size is in error or I am reading the table wrong...Richard R

 

[Greenie]

Richard, what good is a number on a chart?

Let me know how the bucket test goes.

 

[RichardnTn]

Greenie, I will check it out tomorrow... I will run 2 x .03 at 500 psi and see what I get...check this out too

http://www.spray.com/ispray/application_module.html

or this:

http://www.windtrax.com/NozzleVolume.pdf

Best to you, Richard

 

[Greenie]

Thanks.

Very familiar, kinda cracks me up that we see roughly 1/2 the flow that the charts show, just goes to show there are a lot variables.