King Butler Lid

[Numero Uno]

http://i212.photobucket.com/albums/cc62 ... Lid024.jpg

 

[Numero Uno]

Rest of Pics to arrive on Tuesday...

 

[Brian L]

You don't run a kunkle in your setup?

 

[Numero Uno]

Not any more...

If I was to purchase a new version,I would go Bayco...

 

[The Magician]

I would put Greenies setup on that lid. Less restriction and good looking setup. Yes he has good looking nipples for tanks.......

 

[Jim Martin]

 

[Rex Tyus]

I would put Greenies setup on that lid. Less restriction and good looking setup. Yes he has good looking nipples for tanks.......

I was gonna say that, but I get accused of being a shill too much as it is now. 8)

 

[Brian L]

Caesar, so now you are using the stock relief valve that comes with the tm?




Wouldn't it be better to use a kunkle type unit and one 2.5 hose outlet instead of using the stock relief valve and 2 2.5 hoses coming off the tank?

 

[Numero Uno]

The way she is running now...

I truly cannot complain,Butler tweaked the spring about a month ago...

She is insane,gonna get a pair of 3inch nipples and elbows just to compare...

Tinker,tinker...

But that shop has been making carpet cleaning items for decades...

They have 4 more ideas in different stages right now...

I am going over which ideas,I had from years past to attempt now...

Hopefully one a month so as to give me a start and finish goal...Capeesh...

My whole goal is to have a nice inside image like the original unit has...

No hoses hanging here and there ? An a reel system that is function-able and well built.And made to my specifications.Not a generic catalog type fit...

But I should have approached these guys years ago...

Pandoras box is opening...

 

[asupremeclean]

right on

Yea it would be nice if butler could make the setup the way it runs with the 2 ports and 2.5 hoses.
No need for such a thick inner wall on the hose reel if your going to disconnect anyhow. Whereas now there is no room at all to carry all that 2.5 hose.

I just recently switched to this new setup and wow what a major increase in suction and I believe I will get better gas mileage as well seeing as though I had to turn the pods down to get the rpms to normal. When I hooked it up for the first time the rpms went through the roof.

pic is great Ceasar looking forward to more.

Anyone got pics of greenies setup on a butler?

 

[Greenie]

here are a few Butler pics.

most of the guys just use the stock 2.5 elbow with a single 2.5 hose.

oops...the last one was an early 5 port prototype of the Vanifold, it's mostly used by V/AT users.

 

[Kevin B]

Greenie, do you have 3-2 - to - 2-2.5's?

This way, guys with 2 wand setups, can just add another line off the tank, to the adapter....and away you go.

 

[Numero Uno]

Nobody noticed what was in the background?

 

[asupremeclean]

pics

Greenie, the first 2 pics show alot of hose.
Is this with the kind of set up we are talking about with the 2 ports
or is it straight off the live reel?

Do you have any with the y installation?

Also what is the best way to hook the 2.5 hose to the hose reel
in a butler?

I have a male swivel cuff suspended from the round opening
in the hose reel by hanger wire. I do not like it becuz it is not a smooth wind. Bunches up. Hard to reel.

Any suggestions?

 

[Numero Uno]

Will have before and after pix of a Chinese Restaurant.Soon...

With setup...

2ND Butler truck is going 2 inch to 1.5 inch...

So I will have some questions for my Buddy to see what he thinks of the King Butler versus stock...

An no he will not consider wand or hose options much less a glide...

But he suffers from shoulder problems,go figure...

But I have the other items being manufactured also...

2 great new items everyone should consider...I think...

An these people I am using have been making wands and tanks for 25 plus years...