Mach 15 who likes this wand?

[Acp]

Thinking about buying one but wanted more feedback.

I like the glide set up a lot. We would be running this one with a TNT and #4 LG heater

Ive heard mixed opinions, is a 45 blower too small?

anyone absolutely hate this wand?

thanks in advance!

 

[hogjowl]

All wands are trash compared to the Devastator

 

[SamIam]

Thinking about buying one but wanted more feedback.

I like the glide set up a lot. We would be running this one with a TNT and #4 LG heater

Ive heard mixed opinions, is a 45 blower too small?

anyone absolutely hate this wand?

thanks in advance!

It’s great on commercial no chatter!

After crb’ing the slot picks up left over crap!

It’s a great wand.

 

[BIG WOOD]

I love it. Leave that wand on the carpet, and that 45blower will handle it just fine. And since you’re fuel heated, go with a 10flow

 

[Dolly Llama]

Ive heard mixed opinions, is a 45 blower too small?

don't let any peeder hED ever tell you a 45 is too small.
It's the ideal single wand blower when cranked to 3100+ RPM @ 14+ HG

only benefit to a 47 is less RPM for same performance = less noise to hush


and if someone has a TM with 56 or 59 blower to single wand with...they're mow-rons or have small peeder syndrome


..L.T.A.

 

[Acp]

ya our vac relief opens pretty quick on the TNT when the wand is on the carpet.

Steambrite has it on sale for $689. We are ordering a Devastator for the other truck but always have wanted to try the Mach

 

[Dolly Llama]

ya our vac relief opens pretty quick on the TNT when the wand is on the carpet.

not familiar what relief valve Judd uses or where it's located .
I'm assuming it can be adjusted ?
if not, it's one of those Knuncklehead valves Greenie was hawking years ago....they're junk for our application , because when they pop, your HG drops dramatically til it resets ...so you have to put a hillbilly rig cap with small whistling holes drilled in it over the valve

if you have one of those valves...pitch it and get a good spring 'n bushing relief valve

..L.T.A.

 

[Acp]

its a spring valve

 

[Mikey P]

ya our vac relief opens pretty quick on the TNT when the wand is on the carpet.

Steambrite has it on sale for $689. We are ordering a Devastator for the other truck but always have wanted to try the Mach

Put a Bayco valve on your Judson, the stock is junk

 

[Acp]

Put a Bayco valve on your Judson, the stock is junk

u got a link by chance? I googled it but a bunch of different ones came up

 

[Living The Dream]

I have the titanium version with a 6 jet and 9501 jets. I have a tuthill 4007 blower. I really like this wand for everything but berber. I'm currently looking at doing the upgrade to the 5 jet that the new wands run.

 

[Mikey P]

u got a link by chance? I googled it but a bunch of different ones came up

https://www.magicwandcompany.com/Bayco-Valve-p/baycovalve.htm

 

[BIG WOOD]

I have the titanium version with a 6 jet and 9501 jets. I have a tuthill 4007 blower. I really like this wand for everything but berber. I'm currently looking at doing the upgrade to the 5 jet that the new wands run.

I love my 5jet. I never saw a need to have 6jets on a wand. You can use bigger flow output on the jets and you get a much better flushing on the carpet without over wetting it. I'd really like to try a 4jet version if they had it available.

 

[Mikey P]

Less jets, more IMPACT.

 

[BIG WOOD]

More jets, the sharper the water jet, which causes lines in the carpet from the spray.

 

[steve_64]

[QUOTE="sOOper hero, post: 4564433, member: 40108"f someone has a TM with 56 or 59 blower to single wand with...they're mow-rons or have small peeder syndrome


..L.T.A.[/QUOTE]

I'll take my 56 over the 47 anytime. I am still dialing in the 47 but so far the 56 is still way better.

I want to try a 59 someday.

But maybe the wand would make a difference too. I haven't tried enough variations but the 56 it's not as big a deal.

 

[Dolly Llama]

I haven't tried enough variations but the 56 it's not as big a deal.

not if massive overkill is your thing..

..L.T.A.

 

[steve_64]

not if massive overkill is your thing..

..L.T.A.

I can go faster and get better dry times. Not overkill imo.

 

[Dolly Llama]

I can go faster and get better dry times. Not overkill imo

can't argue with what you "think"
but the fact is, you can only pull so much air through a straw (wand and hose)

very few do side by side same day/same room evaluations
and even fewer have measured recovery

98.25% is anecdotal baloney and pack following parroting.....


..L.T.A.

 

[GreenTechAgain]

I'm thinking @Acp with your Judson you can run any wand you want. (I used to have the same machine).

Buying from steambrite is another matter.

 

[Acp]

haha ya I had one annoying experience with steambrite.. and their shipping definitely isnt the fastest I would probably get the wand sometime early summer if I order now lol

Its funny a lot of these distributors still havent figured out that a clean modern website with easy navigation and fast shipping makes people want to spend 2x as much money with them.

I cant stand these 90s websites with super tiny font and shitty navigation menus, just spend 800 bucks on your site for gawds sake

 

[BIG WOOD]

haha ya I had one annoying experience with steambrite.. and their shipping definitely isnt the fastest I would probably get the wand sometime early summer if I order now lol

Its funny a lot of these distributors still havent figured out that a clean modern website with easy navigation and fast shipping makes people want to spend 2x as much money with them.

I cant stand these 90s websites with super tiny font and shitty navigation menus, just spend 800 bucks on your site for gawds sake

COUGH!COUGH! COBB!

 

[Hack Attack]

@Acp Early days I know, what are your 1st thoughts on your wand?
If not received yet keep us updated, the first couple days always seem weird using a new tool

 

[Acp]

will do, doesnt come until next week