multi sprayer.........

[Jim Martin]

I use it for protector.......some other cleaner here in town gave it to me about 4 or 5 years ago and I have no paper work on it....where the wand quick connects to the trigger all of the sudden is leaking really bad........is there a rebuild kit for this and if so who has it...............?????

 

[vincent]

mine did the same thing, I threw it away and put a powerwasher gun on it.

 

[Aaron Richards]

I would think Jon-Don or interlink would have what your looking for.

 

[Johnny]

mine did the same thing, I threw it away and put a powerwasher gun on it.

I also.

 

[Chris A]

mine did the same thing, I threw it away and put a powerwasher gun on it.

me too

 

[Bill Soukoreff]

They are just foster fittings, you should be able to find anywhere you get your foster or parker quick connects.

 

[tmdry]

I use it for protector.......some other cleaner here in town gave it to me about 4 or 5 years ago and I have no paper work on it....where the wand quick connects to the trigger all of the sudden is leaking really bad........is there a rebuild kit for this and if so who has it...............?????

Mine used to do that from time to time, I flushed it all out. Than used a sewing thread needle on the tip to remove any protector build up. The area that was leaking on mine was near the tip, the bolt there would not thread anymore. So i Jb welded it, few hours later was hard as a rock, never leaks anywhere on the wand now. Try that.