Mytee 2000 Watt Heater, dropping pressure

[jstucky]

I believe I have the 2000 watt 2 Switch External Heater

The first one I ordered had some kind of faulty wiring..It was replaced immediately under warranty!!

The one that I have now has been used sparingly. Maybe 10-15 times in the 2 or so years that I have had it. The reason I wasn't using it much was because it seemed to drop the pressure more than I wanted it too. Not too bad just more than I liked.

I hooked it up twice recently and the pressure just seems to be almost nothing. Quick connects get hot just almost no pressure.
Without the heater machine works fine as far as pressure.

???

Also any ways to rig up a heater/porty to be easily moved along as you go?? I.E. heater on dolly or push cart??


Thanks
Jordan

 

[juniorc82]

I have 2 of the myte 2400 watt heaters. Tryin hooking up the quik connects opposite. I know on mine if you hook it up a certain way and have the water flowing through the wrong connector it does the same thing.

 

[John LaBarbera]

I believe I have the 2000 watt 2 Switch External Heater

The first one I ordered had some kind of faulty wiring..It was replaced immediately under warranty!!

The one that I have now has been used sparingly. Maybe 10-15 times in the 2 or so years that I have had it. The reason I wasn't using it much was because it seemed to drop the pressure more than I wanted it too. Not too bad just more than I liked.

I hooked it up twice recently and the pressure just seems to be almost nothing. Quick connects get hot just almost no pressure.
Without the heater machine works fine as far as pressure.

???
Try flushing with white vinegar. It sounds like a hard water/alkaline build-up.
Also any ways to rig up a heater/porty to be easily moved along as you go?? I.E. heater on dolly or push cart??


Thanks
Jordan

 

[John LaBarbera]

I believe I have the 2000 watt 2 Switch External Heater

The first one I ordered had some kind of faulty wiring..It was replaced immediately under warranty!!

The one that I have now has been used sparingly. Maybe 10-15 times in the 2 or so years that I have had it. The reason I wasn't using it much was because it seemed to drop the pressure more than I wanted it too. Not too bad just more than I liked.



I hooked it up twice recently and the pressure just seems to be almost nothing. Quick connects get hot just almost no pressure.
Without the heater machine works fine as far as pressure.






Try flushing with white vinegar
???

Also any ways to rig up a heater/porty to be easily moved along as you go?? I.E. heater on dolly or push cart??


Thanks
Jordan

 

[John LaBarbera]

I believe I have the 2000 watt 2 Switch External Heater

The first one I ordered had some kind of faulty wiring..It was replaced immediately under warranty!!

The one that I have now has been used sparingly. Maybe 10-15 times in the 2 or so years that I have had it. The reason I wasn't using it much was because it seemed to drop the pressure more than I wanted it too. Not too bad just more than I liked.

I hooked it up twice recently and the pressure just seems to be almost nothing. Quick connects get hot just almost no pressure.
Without the heater machine works fine as far as pressure.

???







Also any ways to rig up a heater/porty to be easily moved along as you go?? I.E. heater on dolly or push cart??


Thanks
Jordan

Try flushing with white vinegar

 

[Lee Stockwell]

Quick couplers can get clogged after using the vinegar. Take them off and flush, rinse and reinstall them.

 

[John LaBarbera]

Quick couplers can get clogged after using the vinegar. Take them off and flush, rinse and reinstall them.

That's a good idea. Thank you.