MYTEE CUFF LYNX

[John LaBarbera]

i recieved mine today but mine does not have the o-rings. should i try using them without the o-rings?

I'm at a show. I'll ask Nathan to mail you some today.

 

[Mikey P]

I don't see any need for the O rings, they actually make the set hard to mate together

Sent from my DROID2 using Tapatalk

 

[John LaBarbera]

I don't see any need for the O rings, they actually make the set hard to mate together

Sent from my DROID2 using Tapatalk

Actually, I won't apologize you'll just have to come to terms with it.

 

[Dan Joner]

Not harder to mate together, just more secure. But I agree that they are probably not needed - unless your machine is weak.

 

[Billy]

I used mine today without the O rings since mine also didn't have them.

The Double Swivel is nice though. Even without the O Rings they hook together snugly at this point. I will be very curious as to how the 2.5" perform since we use all 2.5" accept for 16' lead hoses.

Thanks John for the Sample!

 

[Jim Martin]

no need for the o-ring....they are fine with out it.......

 

[Fred Homan]

Where can the Mytee Cuff Lynx be purchased?

 

[Jim Nazarian]

I just got mine, thanks John!

No O rings as well...if they are suggested, please add me to the list.

 

[Hoody]

We (Superior) got ours too. Very impressive

 

[dealtimeman]

i recieved a shipment of orings today!!! want to see if there is a difference in performance or overall ease of use.

 

[Nate The Great]

i recieved a shipment of orings today!!! want to see if there is a difference in performance or overall ease of use.

I got them too. I tried them out. The definitely make it seal but harder to tighten. Most definitely would ever come apart for the guys on the fence. I only tried 1 o-ring. I may need to eat my Wheaties if I try 2 o-rings..... shiteatinggrin

 

[Jimmy L]

The only thing I got was an envelope of O rings....no cuffs.

 

[Ryan]

Same here I just got a envelope of O-rings.

Edit: I received the Cuff Lynx in the mail today, I guess the O-rings just beat it here.

The quality is excellent these cuffs lock very tight even with out the o-rings. The packaging was nice too, reminds me a little of apples packing. Nice touch.

 

[Fred Homan]

WHO sells these cuffs? Where?

 

[Royal Man]

I sprayed a little teflon lube inside of mine.

Seems to help quite a bit for taking them apart.

 

[John Olson]

WHO sells these cuffs? Where?

Fred stephen told you we have them. Call me tomorrow and we'll send them out.

 

[floorguy]

i got some.....they look nifty...

not as "hefty" built as flash cuffs, but at 1/2 the price, who cares...

i like the swivel being A LOT looser

 

[Hoody]

John Olson" data-source="" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

[quote="Fred Homan":1c0sug7x]WHO sells these cuffs? Where?

Fred stephen told you we have them. Call me tomorrow and we'll send them out.[/quote:1c0sug7x]

SteVen

:mrgreen:

 

[Nate The Great]

I thought it was steffen?

 

[Lyman]

Do these cuffs get rid of the" flow by joe "air leak. Meaning, when you put the wand on the carpet, can you hear the cuff leaking or loosing vac.

 

[Ryan]

Do these cuffs get rid of the" flow by joe "air leak. Meaning, when you put the wand on the carpet, can you hear the cuff leaking or loosing vac.

With both o-rings on there is no way these cuffs are leaking. Mine works fine without the O-ring.

 

[floorguy]

I thought it was steffen?

[quote="John Olson":3fp8of9w][quote="Fred Homan":3fp8of9w]WHO sells these cuffs? Where?

Fred stephen told you we have them. Call me tomorrow and we'll send them out.[/quote:3fp8of9w]

SteVen

:mrgreen:[/quote:3fp8of9w]


i thought it was stiffler.....

 

[Royal Man]

John ,

I would like to publicly thank you for sending out samples of your Cuff Lynks.

(It seems you sent out FAR more than you offered to.)

Mine work great!!

I lubed the O-rings a little to help with the break in.

As a sugestion, I think that if the small outer ring had a few ridges, a small space, a few ridges and so forth.

It would be easier to apply the force needed loosen and lighten the cuffs.

Maybe I'm a whimp, But, when it gets up to 2" or even larger I think it would help.


As a note;

If you have a weblink for these cuffs. I'll post a review of them on FaceBook for you, to help reward your generosity.
(300 cleaners so far)

 

[John LaBarbera]

John ,

I would like to publicly thank you for sending out samples of your Cuff Lynks.

(It seems you sent out FAR more than you offered to.)

Mine work great!!

I lubed the O-rings a little to help with the break in.

As a sugestion, I think that if the small outer ring had a few ridges, a small space, a few ridges and so forth.

It would be easier to apply the force needed loosen and lighten the cuffs.

Maybe I'm a whimp, But, when it gets up to 2" or even larger I think it would help.


As a note;

If you have a weblink for these cuffs. I'll post a review of them on FaceBook for you, to help reward your generosity.
(300 cleaners so far)

Your welcome, Dave. And thanks for your offer, Nathan is working on the link thing.

 

[Lee Stockwell]

We like them. Switching everything over once all the parts are available. 2.5 to 2, 2 to 1.5 and ends for 2" and 1.5" tools.

 

[Ryan]

Same here I'm switching all my stuff over.

 

[floorguy]

bring on the 2.5


got that lint hog for 2.5 done yet???

ohhhhh and i got another idea for a type of holder

 

[Chads]

I got mine last night looks nice, my girl liked them too, so far the are slobber proof.

 

[John LaBarbera]

I got mine last night looks nice, my girl liked them too, so far the are slobber proof.

What a little doll. That made my day, thank you.

 

[John LaBarbera]

bring on the 2.5


got that lint hog for 2.5 done yet???

ohhhhh and i got another idea for a type of holder

Okay, whats the idea? We'll tell if it is great or not. lol