need help with dripping jets

[sarrik]

The jets on my wand are dripping, even when the extractor is not on. I took the jets off and cleaned the screens, but they still drip. Any suggestions?

 

[Jim Martin]

get a hold of Joe and let him know what type of valve you have and have him send you a rebuild kit.....
check valves on the jets will help also.....

and get rid of the screens on the jets...you should have a good screen on the wand valve.....

 

[Royal Man]

Buy some drippless screens. They have a spring loaded bb in them that acts like a valve.

 

[Contemporary Carpet Clean]

the o-rings on the K or P valve (the wand trigger valve) are worn out!....We replace those o rings every month or two. Go to a specialty o ring/gasket shop and bring in a new o ring and let them size it up. Make sure you tell them that soap and hot water gets used with your application to ensure the proper o ring material. I think the material and or brand of o ring needed it VITON. I am 100 percent sure that this is your problem.

 

[sarrik]

Thanks Richard!