New Mytee Rotary Extractor

John LaBarbera · Aug 28, 2012

Jim Martin said:
in all the places I have worked and all the motors I have rebuilt.....I cant say I have ever seen one hold up unless it was attached to something that was free spinning.......

What can I say, Jim. Maybe they were too small to do the job. I can asure that this is not the case with this motor. High Speed burnishers take a bit of load and the best ones out there use PM motors. But to each there own.

joeynbgky · Aug 29, 2012

I would seroiusly consider this....I am so glad to hear mytee has been testing it along time before sending to market.. I have a 360I on one truck but would like to have this on the new one. John.....is belinda coming back? She's missed. Send me a new machine to test for a week. And if I like it ill buy it.. deal???

Sent from my T-Mobile G2 using Tapatalk 2

John LaBarbera · Aug 29, 2012

joeynbgky said:
I would seroiusly consider this....I am so glad to hear mytee has been testing it along time before sending to market.. I have a 360I on one truck but would like to have this on the new one. John.....is belinda coming back? She's missed. Send me a new machine to test for a week. And if I like it ill buy it.. deal???

Sent from my T-Mobile G2 using Tapatalk 2

We miss Belinda too. Her mother was very ill and she had to quit to take care of her. Belinda is a great gal. I don't know when and if she is coming back. We keep hoping.

dealtimeman · Aug 29, 2012

John any videos of the trex operating?

Giorgio · Aug 29, 2012

That T-Rex and ETM look like a respectable combo.

Nicely done!

Cheers!

John LaBarbera · Aug 29, 2012

dealtimeman said:
John any videos of the trex operating?

Were working on it.

John LaBarbera · Aug 29, 2012

George III said:
That T-Rex and ETM look like a respectable combo.

Nicely done!

Cheers!

Thank you

Jim Martin · Aug 29, 2012

John LaBarbera said:
What can I say, Jim. Maybe they were too small to do the job. I can asure that this is not the case with this motor. High Speed burnishers take a bit of load and the best ones out there use PM motors. But to each there own.

Most ( not all ) of your High Speed burnishers are belt driven....not really comparing apples to apples IMO.....your taking a machine that is sitting on a ( some what ) slippery surface with a pad...you will get some torque on the start up...but then all it is going to do is free spin with a lot less resistance......... nothing compared to a rotary that is gear driven...with a large truck mount having it sucked down to a carpet surface.....There are start capacitors on those A/C motors for a reason.....

I am not trying to knock your machine.....and I do not clame to be the smartest person here....but I spent years doing things like this and I do know my motors and mechanics of things......time will tell I guess..............

Giorgio · Aug 29, 2012

I like the motor on the T-Rex... It's very shiney!!! I like shiney things... :very_drunk:

Eric Valentine · Aug 29, 2012

The motor on the T-Rex looks to be a bitt larger and more torque than the motor on a RV360/i.

Nate The Great · Aug 29, 2012

Eric Valentine said:
The motor on the T-Rex looks to be a bitt larger and more torque than the motor on a RV360/i.

So does Jon's belly too, since I last seen him... Sorry, I tried helping myself, but couldn't! :winky:

John LaBarbera · Aug 30, 2012

Nate The Great said:
So does Jon's belly too, since I last seen him... Sorry, I tried helping myself, but couldn't!

Yes, it's a funny thing, the more hair I lose the bigger my belly gets. I've tried getting it to go the other way, but to no avail. And Nat, BTW, it's John not Jon. Wise guy.

floorguy · Aug 30, 2012

To shiny....they tend to spot up....a nice black would be good....

and on burnishers, the start up is off the floor, so no torque....but if you hit uneven surfaces, or get it caught under a shelf....welllll lets just say i have killed a 17hp motor :icon_redface:

they can get plenty opf torque...even with belt driven....

welllll shit this may mean i have to come out there now...I was trying to decide

hogjowl · Aug 30, 2012

I am a bit late to this party, but I am certainly interested in this machine. I hope it really IS a well thought out, fine turned machine.

Desk Jockey · Aug 30, 2012

hogjowl said:
I am a bit late to this party, but I am certainly interested in this machine. I hope it really IS a well thought out, fine turned machine.

You? You'll be lucky if John sells you one after all the flack you've given his ETM.

John LaBarbera · Aug 30, 2012

hogjowl said:
I am a bit late to this party, but I am certainly interested in this machine. I hope it really IS a well thought out, fine turned machine.

Well shucks Petunia Im speechless. Just hog tie me to the side of the barn. Cuz I'm having ribs tonight.

Shorty · Aug 31, 2012

George III said:
I like the motor on the T-Rex... It's very shiney!!! I like shiney things...

Well George, you'll probably like the pants of most of John's competitors, they're all shiny.

John's though, would be dull, as he always seems to be out doing things, testing,trying to match my hair and belly styles, etc; not getting shiny sitting behind a desk counting beans.

Desk Jockey · Aug 31, 2012

ShortyDownUnder said:
not getting shiny sitting behind a desk counting beans.

Hey! whats wrong with counting beans, someone has to do it!

hogjowl · Aug 31, 2012

John LaBarbera said:
Well shucks Petunia Im speechless. Just hog tie me to the side of the barn. Cuz I'm having ribs tonight.

Never mind. I just took the time to read Jim Martin's comments.

I'll wait for the revised version to come out after all the hoopla dies down and a few motors burn up.

But, keep me on your Christmas card list.

Desk Jockey · Aug 31, 2012

Damn, if anything Piglet you are consistant! :icon_rolleyes:

hogjowl · Aug 31, 2012

Well, would YOU buy one now that Jim said the motors are crap?

Desk Jockey · Aug 31, 2012

I respect Jim's opinion because he has proven he really knows his sh*t but do you really think Mytee would go to this much expense without some serious RD on the unit?

hogjowl · Aug 31, 2012

Of course not, that never happens in this industry.

What was I thinking ...

Desk Jockey · Aug 31, 2012

LOL

you baad maanN veery baad maaN!

John LaBarbera · Aug 31, 2012

Doc Holliday said:
I respect Jim's opinion because he has proven he really knows his sh*t but do you really think Mytee would go to this much expense without some serious RD on the unit?

I agree. I think most on the board feel the same way. Jim has proved time and again that his experience and knowledge is expansive. I especially was impressed how he was able to help guys that had trouble with their vortex machines.

FB19087 · Sep 1, 2012

Doc Holliday said:
I respect Jim's opinion because he has proven he really knows his sh*t but do you really think Mytee would go to this much expense without some serious RD on the unit?

Is this question for everyone...or just Marty?

:icon_twisted:

Mikey P · Sep 1, 2012

So John

what sort of press is the Trex getting on other boards?

John LaBarbera · Sep 1, 2012

Mikey P said:
So John

what sort of press is the Trex getting on other boards?

I dont know, why dont you go over and look and give us a review? So I take it you didn't use a rotary today, huh?

Mikey P · Sep 1, 2012

I used the Trex knock off Bristor and I are working on.

It's a million ways better but only cost six bucks.

John LaBarbera · Sep 1, 2012

Mikey P said:
I used the Trex knock off Bristor and I are working on.

It's a million ways better but only cost six bucks.

So what rotary did you use on your job today? And can you quit pouting. I'll let you use one when I have more inventory.

New Mytee Rotary Extractor

Member

Supportive Member

Member

Everyday is Saturday.

Member

Member

Member

Supportive Member

Member

Member

Member

Member

Supportive Member

Idiot™

Member

Member

RIP

Member

Idiot™

Member

Idiot™

Member

Idiot™

Member

Member

FB19087

Guest

Administrator

Member

Administrator

Member