Nuke em all and let god sort them out?

Cleanworks

Moderator
Joined
Oct 22, 2012
Messages
26,991
Location
New Westminster,BC
Name
Ron Marriott
So Ron if we use a acid rinse and it leaves the carpet in an acid state does it attract more soil? And I know that some acid rinse products do leave a residue. And should we be concerned when all carpet is nothing more than a 1/2 inch of plastic?
I don't think the ph matters as much as the composition of the detergent left behind. It's just that there seems to be a mentality out there that you have to neutralize your alkaline prespray with an acid rinse. A poorly formulated acid detergent will leave as much residue as a poorly formulated alkaline detergent.
 

BIG WOOD

MLPW
Joined
Feb 4, 2016
Messages
13,262
Location
Georgia
Name
Matt w.
It makes sense that the only reason I never got callbacks for so many years was because I was just rinsing with plain water. Sure, I did an acid rinse yesterday on a job, just because there was dog urine spots. But if it was just a normal cleaning, I would've just let plain water do the job
 
  • Like
Reactions: Papa John

SamIam

Member
Joined
Aug 9, 2012
Messages
11,115
Location
California
Name
sam miller
I don't think the ph matters as much as the composition of the detergent left behind. It's just that there seems to be a mentality out there that you have to neutralize your alkaline prespray with an acid rinse. A poorly formulated acid detergent will leave as much residue as a poorly formulated alkaline detergent.
Try last step it’s jim Martin approved
 
  • Like
Reactions: Papa John

Loren Egland

Member
Joined
Oct 18, 2006
Messages
1,284
Location
Antioch, California
Name
Loren Egland
I don't think the ph matters as much as the composition of the detergent left behind. It's just that there seems to be a mentality out there that you have to neutralize your alkaline prespray with an acid rinse. A poorly formulated acid detergent will leave as much residue as a poorly formulated alkaline detergent.

And there is a lot more to cleaning performance than pH.

And some water can have a pH well over neutral, and have other impurities.

When I run out of other cleaning agents, or can’t afford to buy more, I just use water only. :hopeless: :)
 
  • Like
Reactions: Cleanworks

Mark Saiger

Mr Happy!
Joined
Dec 26, 2006
Messages
11,197
Location
Grand Rapids, MN
Name
Mark Saiger
We have a neighboring town with a pH of 10.5 in their city water.

In my area the water will vary anywhere around 8 pH too close to 10 pH. A lot of minerals also..

it is rare that we find a neutral 7 pH in my area. But anywhere from 60 to 70 miles away over with my brothers they are in good 7 pH good quality water.
 
  • Like
Reactions: Loren Egland

Ed Valentine

Member
Joined
Jun 18, 2013
Messages
488
Location
Milan, MI
Name
Ed Valentine
BTW, one very important aspect to consider (and most do not) is the "strength" on the PH which makes the difference and not necessarily the (high or low) number. I realized this years ago when we formulated our line of cleaning agents.
I am sure, Mr. Pemberton would agree since he is one of the top Specialists in this area.

Best to all
 

Desk Jockey

Member
Joined
Oct 9, 2006
Messages
64,833
Location
A planet far far away
Name
Rico Suave
BTW, one very important aspect to consider (and most do not) is the "strength" on the PH which makes the difference and not necessarily the (high or low) number. I realized this years ago when we formulated our line of cleaning agents.
I am sure, Mr. Pemberton would agree since he is one of the top Specialists in this area.

Best to all
Ed you're saying there is more to the power of hydrogen number? I thought the number itself indicated acid or base. Logarithmic x10 up or down.
 
Joined
Oct 10, 2006
Messages
3,739
Location
Ann Arbor
Name
Steve Lawrence
My city pH is 6.5. Yahoo, no acid rinse needed!

Or considered.
We are not that scientific but try to do a good job for our customers.
Handing off the biz to my son in about 10 months. Hope he does well!!!!!
 
Last edited:

Ed Valentine

Member
Joined
Jun 18, 2013
Messages
488
Location
Milan, MI
Name
Ed Valentine
Blue-Collar;

You stated: " I thought the number itself indicated acid or base"

Yes, the number indicates if it is acid, or, alkaline.

Regarding the PH strength, which IMHO has to be important: As an example, This is why there are average liquid Drain Cleaners, better, and best. Another example I used to demonstrate years back was to use Ammonia as an example. A bottle of Ammonia measured a certain PH.
I took an empty bottle and poured half of that Ammonia into that bottle along with half water. This measures the same PH. Then, I poured 1/4 into an empty bottle and that measured the same PH to.

Which one was stronger? Obviously, the full strength bottle!

Hope this helps.
 

Latest posts

Back
Top Bottom