These 4 products in sequences are for removing the protein based stains.
Only when the stain is satisfactory or unsatisfactorily removed will we then decide on the next move.
What do you think?
Roger Koh
Leather Doctor® System
d’Protein11.0™ pH value 11.0 is a protein based stain remover.
To: Remove blood, body-discharge, milk, cream, ice-cream, egg, meat juices, vomit, perspiration, urine, etc.
For: Aniline, Pure-Aniline, Semi-Aniline, Veg-Tan, Pigmented, Bicast, Nubuck, Suede or Woolskin.
Identify: Inspect & remove all caked & surface deposit gently before application.
Instruction: Apply with drip, cotton swab or spray.
Extract & reapply using continuous gentle agitation until stain is removed.
Neutralize with acidifier2.0 or for urine decontamination use d’Urine2.2.
Use clean3.8 to clean remaining sticky residues.
Always follow by rinse3.0 to stabilize leather pH integrity & remove all residues until towel shows clean.
acidifier2.0™ pH value 2.0 is a strong leather acidifier.
For: Aniline, Pure-Aniline, Semi-Aniline, Veg-Tan, Pigmented, Bicast, Nubuck, Suede or Woolskin.
To: Neutralize strong alkaline exposure that cause bleeds, marks, streaks, brightness, tackiness or sliminess.
From: Alkaline leather cleaners, hand soap, ammonia, bleach, lye, caustic soda, etc.
Instruction: Apply with brush, cotton swab or spray & agitate with leatherBrush1, nubuckBrush2 or suedeBrush3.
Let dwell 5 to 30 minutes depending on exposure severity.
Extract with dry absorbent towel.
Check by finger rubbing to reduce sliminess or tackiness while wet.
Follow by rinse3.0 to remove all foreign residues.
clean3.8™ pH value 3.8 is a leather safe aqueous general cleaner.
To: Penetrate, lubricate & suspense soiling safely & effectively through chemical reaction.
For: Aniline, Pure-Aniline, Semi-Aniline, Veg-Tan, Pigmented, Bicast, Nubuck, Suede & all fabric except rayon or silk.
Caution: Identify, inspect, dry soil removal, bleeding test, wet-rub test before application.
Prep: preClean4.3, d’Grease4.9, d’Oil4.4 or d’Ink7.7 to remove extreme soil, grease or oil.
Instruction: Shake well, spray evenly & agitate with leatherBrush1, nubuckBrush2 or suedeBrush3.
Then extract suspended soil with dry absorbent towel.
Always follow by rinse3.0 until towel shows clean.
Routine Care: fatliquor5.0 helps soften leathers.
leatherScent’B, D, S or W helps enhance a non-stick tactile feel with a classic leather scent.
Restorative Care: relaxer3.3 helps hydrate stiff leathers prior to softening with fatliquor5.0.
oilEffect63 or waxEffect95 helps revive pull-up leathers.
rinse3.0™ pH value 3.0 is a leather safe aqueous mild acidifier rinse.
To: Neutralize harmful alkaline & perspiration residues; stabilize and strengthen leather pH chemistry integrity;
impart cationic (+) charges to the leather fibrillary structure.
For: Aniline, Pure-Aniline, Semi-Aniline, Veg-Tan, Pigmented, Bicast, Nubuck, Suede & all fabric except rayon or silk.
Instruction: Shake well, spray evenly & agitate with leatherBrush1, nubuckBrush2 or suedeBrush3.
Then extract suspended soil with dry absorbent towel until towel shows clean.
Periodic-Care: Use fatliquor5.0 to soften and strengthen leathers.
Use leatherScent’B, D, S or W to enhance a non-stick tactile feel with a classic leather scent.
Restorative-Care: Use relaxer3.3 to hydrate stiff leathers prior to softening with fatliquor5.0.
Use oilEffect63 or waxEffect95 to revive pull-up leathers.