Old Zipper Owner....

rwcarpet

Supportive Member
Joined
Dec 6, 2009
Messages
3,084
Location
Youngstown, Ohio
Name
Robert Hodge
Well, UPS brought me a new/old tool Thursday. It's not the prettiest tool here on the board, but man does it clean! Thanks John Olsen. I think it might be one of the prototypes. Put it through the paces today on some nasties and it does clean like everyone says. And drier than I've ever had with all my machines. This tool must really kick ass behind an Aerotech!

Kinda like the clear front window.

zipper_zpsdmz2ohpk.jpg
 
Joined
Mar 29, 2008
Messages
9,565
Location
Hawaii
Name
Nate W.
The only downsize with that Zipper is the height of it.. The Jr can fit under beds and toe kicks... That should have an adjustable spray bar to change the angle..
 
Joined
Oct 10, 2006
Messages
3,740
Location
Ann Arbor
Name
Steve Lawrence
Good buy, Robert! Yeah, that window in front is nice for the customer to see the extracted water--a great show but not too helpful for the operator. New Zippers have a clear, 4" plastic tube in the 2" extraction hose to allow the operator to monitor extraction. You could add that if you like. I had Erik send me 3 of those to use for my RX-20's--much nicer than the original translucent plastic hose.
 

ronbeatty

Member
Joined
Nov 16, 2006
Messages
1,437
Location
Altoona,PA
Name
Ron Beatty
Robert, Running the Zipper with an Aerotech has given us dry times we could never accomplish with a wand. Making long (12 foot) passes also leaves less overlap areas although I really have not been able to see an overlap area since we started to use the Zipper:winky:
 
  • Like
Reactions: Erik

Latest posts

Back
Top Bottom