Power Clean Part Needed!!!!

[RUGMAN1969]

Who or where would I find an exhaust Manifold for a Power Clean Freedom machine with the 25/26 HP Kohler Aegis Engine in it???? At one time I read where some were having luck with finding parts however I can't seem to find the posts.

THANK YOU.....Michael.

 

[Lee Stockwell]

http://www.m-and-d.com/scan/MM=56eff385 ... ql&mv_arg=

Small engine shops that works on Kohler.

 

[fresh1]

http://campaign.vpweb.com/60c2d632-4164 ... b366b747e/
try this

 

[John Olson]

It is a custom piece call Larry at guaranteed cleaning supplies. Call me Monday micheal and I'll get you the number or you can place an order with me and I'll get it for you.

 

[Doug Cox]

I'll save you the time, John. Heres the number for Guaranteed.
708-995-5946

 

[Larry Cobb]

If this part from the vendor I looked at is OEM on your TM . . .

then you need a better-designed new exhaust system.

No OEM should be using SS flex for new exhaust work in a van.

Larry

 

[Johnny]

If this part from the vendor I looked at is OEM on your TM . . .

then you need a better-designed new exhaust system.

No OEM should be using SS flex for new exhaust work in a van.

Larry

You're right, Larry. They don't last long.

Truckmount Haedquarters has PowerClean parts. 805-604-4808.

 

[Shane T]

I had trouble with manifold and other exhaust part between the engine and diverter so this is what I did. Bought a new SS manifold and then I made the rest with SS exhaust parts from Summit Racing. Had it ceramic coated and haven't touched now in probably 3 years.

 

[Jimbo]

Nice work, Shane!

 

[Shane T]

Thanks Jim, I didn't get it right on the first try but eventually worked it out. The coating company also put what they call "Race Coating" on the inside. It has a higher heat rating. I hate that flexible SS crap. It always seems to leak at the slip joint and then get brittle and cracks from excessive heat.

 

[Larry Cobb]

Nice work on the manifold, Shane.

We also make a stainless manifold with fiberglass insulation tubing for our Kohler 31 & 34 HP engines,

but it doesn't have the nice ceramic coating you used.

http://www3.cobbcarpet.com/zen3/index.php?main_page=product_info&cPath=68&products_id=4044

Larry