Ray and the CMS gang come through again

[Mikey P]

How about a custom (non unibody threatening) exhaust shield for the Transit/370?

 

[GeneMiller]

I unbolted it and took it to my table saw. I cut the down spout right off. It's aluminum on mine so a regular saw blade cuts it. Blows straight out now

 

[TomKing]

But Mike is fancy.

Look at the neat hot water hose that goes through the step complete with t and valve.

Nice touch, He's the Gear Master!

 

[Mikey P]

Premium is my preferred term of endearment..

 

[dgardner]

Nice touch!

Those corners look a little sharp - I would take tinsnips and a file to them and round them off..... but that's just me.

 

[Charlie Lyman]

How will that ball valve hold up on the hot water hose? I was thinking about doing that, but I was going to try to find a valve that I don't have to replace every month.

 

[Mikey P]

50 hours and counting

 

[Johnny]

How will that ball valve hold up on the hot water hose? I was thinking about doing that, but I was going to try to find a valve that I don't have to replace every month.

The cheap brass valves from Lowe's last a couple years.

 

[GeneMiller]

They could of hemmed the edges. I was going to make something like that but this was easier. Not the only thing I cut and changed. I had to make it my own.

 

[Pmatte]

Sweet! It has been awhile since I've been here...any photos of the complete rig/van?

 

[Mikey P]

 

[Joe Appleby]

Nice starter rig

 

[Pmatte]

Cool vids. Commentary is even better! But I am a little dizzy

 

[Steve Lawrence]

Thanks for the tour, Mike. Nice rig! Congrats!