rpm on a 1.5 hp buffer

B

Bucey

Guest
trying to rent one tomorrow. the rental store has three 1.5 and the rpm say 1740. the guy says they are low speed. I dont know much about em. is this a 175rpm machine. need to know tonight before I get it tomorrow. Thanks
 
Joined
Oct 7, 2006
Messages
18,851
Name
Lee Stockwell
That's the electric motor speed. Has a 10:1 planetary gear reducer. Thus pad rpm is 175 rpm.
 
B

Bucey

Guest
ok so im good with this one, white pad is less aggrisive and good for a novice?
 
Joined
Oct 7, 2006
Messages
18,851
Name
Lee Stockwell
Yep.

Now make sure to practice ahead of time in a place where no one will laugh at you. A cement garage floor with all breakables out of range is good. Wet the floor, and have fun.
 
R

Ryan

Guest
The key is to get the handle adjusted perfectly to your height. Once you get 'er adjusted perfect at home place a small section of tape on that mark so you can go right back to it at the resty.

Your going to love the results using a 175.
 
B

Bucey

Guest
Just making sure the object is to keep it moving, left to right or vs versa. Also i need to wet down the pad with the pre spray too? and make sure there is enough down for scrubbing on the carpet? Is one pad enough if I use both sides? approx. 3000 sq ft.
 
Joined
Oct 7, 2006
Messages
18,851
Name
Lee Stockwell
Murphy's law: Have at least two pads in case you rip one.

Ask me how I know...
 

floorguy

Supportive Member
Joined
Nov 7, 2006
Messages
6,948
Name
Doug
lifting handle goes right,

dropping handle goes left....


LITTLE BITS


you yank or push down, it will go....
 
J

John Buxton

Guest
Oh and I would suggest you dont do what I did at 14 and think it would be fun to ride...it wasn't, but I still was able to have kids!
 

Latest posts

Back
Top Bottom