We are hanging our rugs over 2x6s with 6 inch corrugated drain. The rugs come out of the centrifuge just damp, no dripping water. I have 2 warehouse ceiling fans over the poles and 3 airmovers blowing from the side. The dehu has the humidity down to 35% at about 88 degrees. An average weight rug is dry in 3 or 4 hours by moisture sensor except for where they hang on the pole.
Any suggestions on getting that area of the rug to dry faster? The ceiling fans blow straight down. Would it be a sizable improvement if the airflow was more at an angle blowing across the tops of the rugs similar to drying walls? I've put the rugs on an angle on the poles and used a tagging gun to hold them on the pole so I can move them around.
I assume that hanging rugs on poles using pins eliminates this?
Any suggestions on getting that area of the rug to dry faster? The ceiling fans blow straight down. Would it be a sizable improvement if the airflow was more at an angle blowing across the tops of the rugs similar to drying walls? I've put the rugs on an angle on the poles and used a tagging gun to hold them on the pole so I can move them around.
I assume that hanging rugs on poles using pins eliminates this?